Home

TREP-S TREP-S 2
Embedded stair profile

TREP-S - Rung profiles with non-slip rubber

153
€49.71
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
RONDEC-E - tapón
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
KERDI-LINE-F-50 - Floor-level shower tray drainage kit... KERDI-LINE-F-50 - Floor-level shower tray drainage kit... 2
Drainage of bathrooms, balconies and terraces

KERDI-LINE-F-50 - Floor-level shower tray drainage kit with horizontal central outlet DN50

€311.60
Complete set for floor-level linear showers with horizontal outlet with integrated reverse siphon. Suitable for installation in a central area as well as in a wall area. Complies with DIN EN 1253 with a drainage capacity ≥ 0.8 l/s and an internal water storage height of 50 mm. (Grating and frame not included)
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Stainless steel profile as a trim in joints floors

165
€76.69
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZA - U-shaped stainless steel profile with double perforation

153
€56.32
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
BARA-RAKEG - Aluminum sheet gutter DITRA 25 BARA-RAKEG - Aluminum sheet gutter DITRA 25 2
Balcony Profiles

BARA-RAKEG - Dripper profile for DITRA 25

153
€100.94
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
RONDEC-A - empalme
Profile Accessories

RONDEC-A - splice

153
€1.21
RONDEC-A splicing accessory. Anodized aluminum profile for wall corners with ceramic cladding.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosuelo / Novopared - Aluminium Straight Edge Trim

165
€25.67
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
DILEX-BT
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€99.09
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
JOLLY JOLLY 2
Edging & outside wall corners profiles

JOLLY-AC - Lacquered aluminum edging profile

153
€18.93
Edging profile that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
BARA-RKK
Balcony Profiles

BARA-RKK - Aluminum balcony gutter profile

153
€78.64
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
SCHIENE SCHIENE 2
Floors profiles

SCHIENE - Tile corner edge protection profile

153
€10.02
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
BARA-RKKE - Aluminum balcony gutter profile
Balcony Profiles

BARA-RKKE - Aluminum balcony gutter profile

153
€100.89
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
Home
Product added to wishlist
Product added to compare.