Home

Edging & outside wall corners profiles

RONDEC-A - Anodized aluminum rounded edge profile

153
€25.75
Anodized aluminum rounded profile for ceramic coated wall corners with a spacer to achieve symmetrical joints. Through the spacer, a joint is defined between the profile and the tile. 
Profile Accessories

SCHIENE-STEP-EB - Splice

€14.49
Splicing Angle Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
€150.56
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
€175.18
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
Accessibility and Safety

Steel tactile stud dry-embedded

275
€707.32
Steel tactile stud dry-embedded with stem to install recessed by mechanical fixation. Manufactured in galvanized steel, AISI 304 stainless steel for impact placement. Designed as a warning solution to identify areas with obstacles. For podo tactile floors and improve accessibility.(Pack of 250 units.)
Balcony Profiles

BARA-RAP - Aluminum cover profile

153
€66.88
Cover profile made of colour coated aluminium. Together with the profile Schlüter BARA-RW, it covers the exposed edges of balconies and terraces. Schlüter BARA-RAP is clipped onto this carrier profile and provides a neat finishing edge while protecting the exposed screed edges from deterioration and the weather.
Accessibility and Safety

Steel tactile stud embedded with resin

275
€505.24
Tactile studs with recessed stud for placement with resin. Made of zinc-plated steel or AISI 304 stainless steel for impact placement. Designed as a warning solution to identify areas with obstacles. To create a tactile floor or pavement and improve accessibility. (Pack of 250 units)
€131.96
Stair nosing profiles with wide non-slip tape (Width 55 mm). Made of brushed stainless steel with a non-slip steppable part. R11 classified according to DIN 51 130.
Walls, Floor and countertops profiles

Novoescocia 4 - Cove-shaped profile overlaid

165
€36.61
Aluminum cove-shaped profile to be installed on finished tiled installations to help cleaning the tiled corners/angles or the skirtings. It is easy to install using adhesives type silicone that maintain the sealing.
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€48.34
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
€17.10
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Slim ramp profile made of aluminum designed to avoid discontinuities in floorings such as low thickness ceramic , vinyl floorings or carpets. The profile has a wide and smoothed visible side with small grooved that favor the slide resistance. Available in anodized aluminum anod. matt silver. Delivered with countersunk holes to improve its fixing by using...
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€46.77
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Product added to wishlist
Product added to compare.