Home

SCHIENE SCHIENE 2
Floors profiles

SCHIENE - Tile corner edge protection profile

153
€9.31
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
SCHIENE-STEP - Cantonera de aluminio para encimera
Profile Accessories

SCHIENE-STEP-EB - Internal angle 135º

€16.46
135º internal angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
RONDEC-A RONDEC-A 2
Edging & outside wall corners profiles

RONDEC-A - Anodized aluminum rounded edge profile

153
€25.75
Anodized aluminum rounded profile for ceramic coated wall corners with a spacer to achieve symmetrical joints. Through the spacer, a joint is defined between the profile and the tile. 
SCHIENE-STEP - Cantonera de aluminio para encimera
Profile Accessories

SCHIENE-STEP-EB - Splice

€14.49
Splicing Angle Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
BARA-RKB BARA-RKB 2
Balcony Profiles

BARA-RKB - Aluminum balcony gutter profile

153
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
BARA-RK BARA-RK 2
Balcony Profiles

BARA-RK - Aluminum balcony gutter

153
€78.04
Edging profile for the exposed edges of surface coverings on balconies and terraces. The profile pro- vides a neat edge appearance while protecting the exposed edges of the screed bed against weathering and corrosion.
BARA-RTP - ángulo externo 135°
Accesories for balcony Profiles

BARA-RTP - external angle 135 °

153
€48.85
External angle 135 ° top for profile gutter to place on existing balconies and terraces, and serves as a support for drainpipes.
BARA-RTP - ángulo interno 90°
Accesories for balcony Profiles

BARA-RTP - internal angle 90 °

153
€44.39
90 ° internally angled piece for rain gutter profile to be placed on existing balconies and terraces, and serves as a support for drainage gutters.
BARA-RTP - ángulo externo 90°
Accesories for balcony Profiles

BARA-RTP - external angle 90 °

153
€44.39
External angle 90 ° for gutter profile to be placed on existing balconies and terraces, and serves as a support for the Schlüter®-BARIN drainage gutters.
TREP-G-B - ancho - R11
Stairs nosing profiles

TREP-GB - Stainless steel stair nosing profiles

153
€131.96
Stair nosing profiles with wide non-slip tape (Width 55 mm). Made of brushed stainless steel with a non-slip steppable part. R11 classified according to DIN 51 130.
Aluminum angle for recessed doormat frame
Entrance matting systems

Angle frame profile for built-in doormat

€58.43
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
Linox esquinero inoxidable sobrepuesto Linox esquinero inoxidable sobrepuesto 2
Movement joint

Novojunta 1 - PVC floor expansion joint

165
€10.52
Profile for expansion joints, manufactured in coextruded PVC, formed by body, rigid and flexible, which allows to absorb small variations of movement offering good resistance.
BARA-RK - empalme BARA-RK - empalme 2
Accesories for balcony Profiles

BARA-RK - Splice piece

153
€3.54
Part special piece for tie or splice for BARA-RK profiles. Profile for pours or edge of balconies and terraces.
DILEX-KS
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€122.67
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Novojunta 1 - PVC floor expansion joint
Movement joint

Novojunta Decor Flecha - Aluminum floor expansion joint

165
€188.03
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Home
Product added to wishlist
Product added to compare.