Home

Brushed stainless steel profile in U-shape with single perforation. Suitable for fixing and mounting Schluter KERDI-BOARD panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for finishing kitchen worktops and utility rooms.
€134.47
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Cover joint profiles

T-shaped profile as a floor transition

153
€7.84
Flashing, joint or T-shaped profile installed as a transition between adjoining floor coverings of the same height e.g. ceramic tiles or natural stone, parquet flooring, concrete pavers, PVC laminate etc.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
Plinths accesories

Novorodapie Rehabit - Outside corner

165
€34.98
Outside corner for skirting board in aluminum. Easy placement on a pre-existing skirting board works. For rehabilitation and reforms.
€108.63
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Plinths accesories

Novorodapie Rehabit - Inside Corner

165
€34.98
Inside corner for skirting board in aluminum. Easy placement on a pre-existing skirting board without works. For rehabilitation and reforms.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
€16.46
90º external angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Plinths accesories

Novorodapie Rehabit - Right cover

165
€20.04
Right cover for skirting board in aluminum. Easy placement on a pre-existing skirting board without the need for works. For rehabilitation and reforms.
Balcony Profiles

BARA-RW - Dripper L-shaped profile

153
€65.55
L-shaped finishing profile made of stainless steel or colour coated aluminium for the exposed edges of balconies and terraces. The profile produces a visually appealing edge finish and protects the exposed edges of the structural slab from weather and corrosion. 
Skirting and coved-shaped profiles

DESIGNBASE-CQ - Aluminium cable hiding skirting

153
€78.28
Cable hiding plinth in lacquered or anodized aluminum with cable duct and installations. High-quality aluminium skirting profile made from colour-coated or anodised aluminium for creating skirting covers with an integrated cable duct.
€16.46
90º internal angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Plinths accesories

Novorodapie Rehabit - Left cover

165
€20.04
Left cover for baseboard or skirting board in aluminum. To easily place on a pre-existing skirting board without works. For rehabilitation and reforms.
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€102.49
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Product added to wishlist
Product added to compare.