Home

Novosepara 1 - Profile to cover joints and separate floorings Novosepara 1 - Profile to cover joints and separate floorings 2
Floors profiles

Novosepara 1 - Perfil tapajunts i separador de paviments

165
€34.72
Profile with slimm visible side made of aluminium or brass which can be curvable, designed to cover joints and separate floorings. This profile, due to its dimensions, is intended to be installed before or after the tiling. The brass model has two heights available. The profile is perfect to be installed in floorings like marble or terrazzo as it can be...
Novopared Novosuelo PVC barras 2,5m Novopared Novosuelo PVC barras 2,5m 2
Edging & outside wall corners profiles

Novopared Novosuelo - PVC edge corner profile

165
€5.06
PVC corners for wall or floor economical modern line at right angles as a finish to protect and decorate corners of ceramic tiles.  Profile with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floors or walls between 6 and 12 mm in height.
BARA-RAK BARA-RAK 2
Balcony Profiles

BARA-RAK - Dripper profile for balcony edge

153
€91.13
Finishing dripper profile for balcony or terrasse edge with drip lip for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of the Schlüter-RONDEC or Schlüter-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
BARA-RTKE - external angle 90 °
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
TREP-B
Embedded stair profile

TREP-B - Anti-slip stair nosing trim

153
€71.49
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
RONDEC-E - ángulo interno
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
Novolistel MaxSahara - Decorative border square profile Novolistel MaxSahara - Decorative border square profile 2
Decorative joints profiles for tiles

Novolistel MaxiSahara - Decorative border square profile

165
€20.31
Square section profile made of PVC with the addition of vegetable fibres from recycled organic waste.Fluted finish that can be installed both indoors and outdoors, providing protection for corners. Available in various colours to provide a solution to multiple trends.
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZC - U-shaped stainless steel profile with single perforation

153
€61.54
Brushed stainless steel profile in U-shape with single perforation. Suitable for fixing and mounting Schluter KERDI-BOARD panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for finishing kitchen worktops and utility rooms.
BARA-RAKE BARA-RAKE 2
Balcony Profiles

BARA-RAKE - Dripper profile for DITRA-DRAIN

153
€126.90
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
TREP-S TREP-S 2
Embedded stair profile

TREP-S - Rung profiles with non-slip rubber

153
€49.71
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
RONDEC-E - tapón
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
T-shaped profile as a floor transition T-shaped profile as a floor transition 2
Cover joint profiles

T-shaped profile as a floor transition

153
€7.84
Flashing, joint or T-shaped profile installed as a transition between adjoining floor coverings of the same height e.g. ceramic tiles or natural stone, parquet flooring, concrete pavers, PVC laminate etc.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Stainless steel profile as a trim in joints floors

165
€76.69
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZA - U-shaped stainless steel profile with double perforation

153
€61.54
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
BARA-RAKEG - Aluminum sheet gutter DITRA 25 BARA-RAKEG - Aluminum sheet gutter DITRA 25 2
Balcony Profiles

BARA-RAKEG - Dripper profile for DITRA 25

153
€100.94
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
RONDEC-A - empalme
Profile Accessories

RONDEC-A - splice

153
€1.21
RONDEC-A splicing accessory. Anodized aluminum profile for wall corners with ceramic cladding.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosuelo / Novopared - Aluminium Straight Edge Trim

165
€25.67
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
SCHIENE-STEP - Cantonera de aluminio para encimera
Profile Accessories

SCHIENE-STEP-EB - External angle 90º

€16.46
90º external angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Home
Product added to wishlist
Product added to compare.