Home

Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Aluminium profiles or ramp end caps with flange or fin for connection. Transition profile with a wide visible face whose surface has been grooved to offer greater resistance to slipping. Its reinforced base allows it to withstand loads and a high level of traffic. This profile is made of anodised aluminium, so it can be installed outdoors or indoors.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€23.47
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€44.16
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Accessibility and Safety

Novonivel - Aluminum transition ramp profile

165
€32.13
Ramp transition profile to avoid the difference of level created when laying floorings at different height, as when a new flooring is layed onto an old one. This is very common in restoration works.
€68.12
Transition profile in the form of ramp whose function is to save the unevenness that occurs when placing pavements at different heights. In rehabilitation or renovation works, for example, this occurs when laying new flooring on top of the old one. Manufactured in stainless steel with brushed finish, which gives it greater resistance and an aesthetic...
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€32.35
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
Floor and wall bridge joints

DILEX-EHK - Cove-shaped sanitary profile

153
€93.37
Stainless steel cove shaped profile for internal wall corners or for floor to wall transitions with high hygienic requirements.
Accesories for balcony Profiles

BARA-RKL - External angle of 135 °

153
€81.75
External angle of 135 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° internal angle

153
€81.75
Internal angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° external angle

153
€81.75
External angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RAP - Splice piece

153
€7.24
Splicing accessory for BARA-RAP. In combination with the BARA-RW watershed, it serves to limit open sides on balconies and terraces.
Accesories for balcony Profiles

BARA-RAP - 90 ° external angle

153
€31.17
External angle 90 ° for BARA-RAP. In combination with the BARA-RW watershed, it serves to limit open sides on balconies and terraces.
Accesories for balcony Profiles

BARA-RW - Splice piece

153
€7.24
Splice for gutter profile in the form of a square of stainless steel or lacquered aluminum to finish off the edges on balconies and terraces.
€14.76
Novosuelo ASTRA Kombu is a stair nosing profile designed for the protection of the edges of ceramic stair treads made of an extra resistant polymer. This profile is versatile to protect and decorate the edges of ceramic tiles, floor separator, worktop edging, steps, etc.
Accesories for balcony Profiles

BARA-RW - 90 ° external angle

153
€32.40
External angle 90 ° for profile gutters in the form of square stainless steel or lacquered aluminum to finish off the edges on balconies and terraces.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Edging & outside wall corners profiles

Novolistel 3 Inox - Stainless steel corner edge profile

165
€53.42
Square section profile, made of AISI304 stainless steel, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Edging & outside wall corners profiles

Novolistel 3 Alum - Aluminum corner edge profile

165
€27.81
Square section profile, made of Aluminum, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Product added to wishlist
Product added to compare.