Home

Accessibility and Safety

Steel tactile stud dry-embedded

275
€707.32
Steel tactile stud dry-embedded with stem to install recessed by mechanical fixation. Manufactured in galvanized steel, AISI 304 stainless steel for impact placement. Designed as a warning solution to identify areas with obstacles. For podo tactile floors and improve accessibility.(Pack of 250 units.)
Balcony Profiles

BARA-RAP - Aluminum cover profile

153
€66.88
Cover profile made of colour coated aluminium. Together with the profile Schlüter BARA-RW, it covers the exposed edges of balconies and terraces. Schlüter BARA-RAP is clipped onto this carrier profile and provides a neat finishing edge while protecting the exposed screed edges from deterioration and the weather.
Accessibility and Safety

Steel tactile stud embedded with resin

275
€505.24
Tactile studs with recessed stud for placement with resin. Made of zinc-plated steel or AISI 304 stainless steel for impact placement. Designed as a warning solution to identify areas with obstacles. To create a tactile floor or pavement and improve accessibility. (Pack of 250 units)
Skirting and coved-shaped profiles

Novorodapie semiflex - Semi flexible PVC skirting

165
€23.95
Semiflex PVC skirting board is a profile made of semi-flexible white or gray PVC. Flexibility highly functional adaptability. White or gray skirting board.
€131.96
Stair nosing profiles with wide non-slip tape (Width 55 mm). Made of brushed stainless steel with a non-slip steppable part. R11 classified according to DIN 51 130.
Skirting and coved-shaped profiles

Flexible PVC skirting board by rolls

275
€141.13
Economic profile flexible PVC skirting board and intended for placement as a PVC base. Auction in cove-shaped profile for easy cleaning, avoiding germs. White skirting board.
Entrance matting systems

Angle frame profile for built-in doormat

€58.43
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
€10.52
Profile for expansion joints, manufactured in coextruded PVC, formed by body, rigid and flexible, which allows to absorb small variations of movement offering good resistance.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€122.67
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€73.65
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Skirting and coved-shaped profiles

Novorodapie L - Anodized aluminum skirting board

165
€62.57
Aluminum skirting board or decorative plinth profile, with an elegant simple design. Metal skirting board with straight lines, easy and quick installation. The profile contoured ends give a snug fit on the wall covering over the bottom perimeter along the dilatation gap joint, thus ensuring the necessary expansion movement to the floor.
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€48.34
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
Slim ramp profile made of aluminum designed to avoid discontinuities in floorings such as low thickness ceramic , vinyl floorings or carpets. The profile has a wide and smoothed visible side with small grooved that favor the slide resistance. Available in anodized aluminum anod. matt silver. Delivered with countersunk holes to improve its fixing by using...
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€46.77
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Walls, Floor and countertops profiles

Novoescocia 4 PVC - Cove-shaped profile overlaid

165
€17.20
Cove-shaped profile made of PVC to be installed in tiled installations for easy cleaning the joints. Very easy to install using mastics or adhesives type silicone which also act like a sealing.  Slightly flexible to adapt to the irregularities of any wall or floor.
Product added to wishlist
Product added to compare.