Home

Walls, Floor and countertops profiles

Novobisel - Decorative beveled tile corner

165
€27.03
Bevelled aluminum corner for use as a protective and decorative edge in corners of walls covered with ceramic tiles, as well as skirting boards or tiled walls at medium height.Its face seen in bezel finished off with a delicate edge, integrates with the coating providing a fine and elegant finish.
Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-MC - Exterior angle

153
€3.57
Special accessory in exterior angle for corner profile for tiles. Brass profile chrome finish for tile wall corners.
Aluminium stair nosing profile to protect and decorate stairs covered with ceramic. The design of its recess allows the installation of any LED strip without the need for a diffuser, giving the profile a greater decorative charge. Its visible anti-slip face contributes to increasing the safety of the staircase. Dimensions a = 22 mm / h = 10 - 12 mm
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Edge countertop profiles

SCHIENE-STEP - Aluminum worktop corner

€65.69
Decorative profiles for the protection of the edges and edges of kitchen countertops. Aluminum profiles for shelves, stair steps or countertops.
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-MC - Internal Angle

153
€3.57
Special internal corner piece for corner tile for RONDEC-MC. Made of chromed brass for the corners of tiled walls.
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-E - external angle

153
€3.63
External angle accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Edging & outside wall corners profiles

JOLLY-P - Decorative PVC edging profile

153
€7.79
PVC decorative edging profile and skirting covering that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
€51.67
Novopeldaño MaxiTokyo is a stair nosing made of Maxi, an exclusive raw material of WPC (Wood Plastic Composite) family of products. Its particular geometry and appearance contribute to embellish all kind of stairs, specially the rustic ones, being the perfect alternative to natural wood profiles.d of stairs, specially the rustic ones, being the perfect...
Profile with slimm visible side made of aluminium or brass which can be curvable, designed to cover joints and separate floorings. This profile, due to its dimensions, is intended to be installed before or after the tiling. The brass model has two heights available. The profile is perfect to be installed in floorings like marble or terrazzo as it can be...
Edging & outside wall corners profiles

Novopared Novosuelo - PVC edge corner profile

165
€5.06
PVC corners for wall or floor economical modern line at right angles as a finish to protect and decorate corners of ceramic tiles.  Profile with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floors or walls between 6 and 12 mm in height.
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Embedded stair profile

TREP-B - Anti-slip stair nosing trim

153
€71.49
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
Decorative joints profiles for tiles

Novolistel MaxiSahara - Decorative border square profile

165
€20.31
Square section profile made of PVC with the addition of vegetable fibres from recycled organic waste.Fluted finish that can be installed both indoors and outdoors, providing protection for corners. Available in various colours to provide a solution to multiple trends.
€126.90
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
Embedded stair profile

TREP-S - Rung profiles with non-slip rubber

153
€49.71
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
€100.94
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Profile Accessories

RONDEC-A - splice

153
€1.21
RONDEC-A splicing accessory. Anodized aluminum profile for wall corners with ceramic cladding.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€99.09
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Edging & outside wall corners profiles

JOLLY-AC - Lacquered aluminum edging profile

153
€18.93
Edging profile that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
€78.64
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€10.02
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€100.89
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
Structural expansion joints

DILEX-BTS - Aluminum structural overlay joint

153
€101.46
Aluminum structural joint profile of superimposing in already installed coatings. It makes possible the absorption of movements in three dimensions.
Edging & outside wall corners profiles

RONDEC-A - Anodized aluminum rounded edge profile

153
€26.55
Anodized aluminum rounded profile for ceramic coated wall corners with a spacer to achieve symmetrical joints. Through the spacer, a joint is defined between the profile and the tile. 
Floors profiles

SCHIENE-ES - Tile corner profile

153
€29.59
Transitions or coverings profile to protect and decorate edges or edges of ceramic tiles and floors. With joint separator between profile and tile.
€42.51
Stair nosing made of Maxi, an exclusive raw material of WPC (Wood Plastic Composite) family of products. Its particular geometry and appearance contribute to embellish all kind of stairs, specially the rustic ones, being the perfect alternative to natural wood profiles.
€70.79
New MaxiDakar rungs are profiles for stair treads or stair nosing designed for the protection of ceramic tread edges made of Maxi material. This material belongs to the family of WPC (Wood Plastic Composites). MAxidakar staircases for stairs incorporate vegetable fibers in their composition.
Edge countertop profiles

RONDEC-STEP - Aluminum worktop corners

153
€83.46
Decorative profiles for the protection of the edges and edges of kitchen countertops. Aluminum profiles with a smooth finish for shelves and kitchens.
Accessories for stair steps

Novopeldaño 4 - Side cover

165
€2.98
Aluminium side cover accessory for Novopeldaño 4 anti-slip stair treads or stair nosing profiles. Stair nosing profile to protect and decorate stairs covered with ceramic tiles. The visible rough visible side helps to increase the safety of the staircase. 
Movement joint

DILEX-BT / VTS

153
€26.65
Supporting profile for the sanitation of structural joints, which can be combined with Schlüter®-DILEX-BT / MT.
Accessories for stair steps

Novopeldaño Eclipse - Side cover

165
€4.97
Aluminium stair nosing profile to protect and decorate stairs covered with ceramic. The design of its recess allows the installation of any LED strip without the need for a diffuser, giving the profile a greater decorative charge. Its visible anti-slip face contributes to increasing the safety of the staircase. Dimensions a = 22 mm / h = 10 - 12 mm
€8.43
Expansion joints or movement joints made of coextruded PVC that allows to absorb movement variations offering good resistance. Model Novojunta 3.
Accesories for balcony Profiles

BARA-RKK - Splicing Space Piece

153
€3.54
Splice for T-shaped gutter profile with dropper, which is placed on a slope with slope.
Accesories for balcony Profiles

BARA-RKK - 90 ° internal angle

153
€46.09
Internal angle 90 ° for T-shaped gutter with dropper, which is placed on a slope with slope.
Accesories for balcony Profiles

BARA-RKK - 90 ° external angle

153
€46.09
External angle 90 ° for T-shaped gutter with dropper, which is placed on a slope with slope.
Entrance matting systems

Angle frame profile for built-in doormat

€46.74
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€52.04
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€31.24
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Accesories for balcony Profiles

BARA-RTKEG - external angle 135°

153
€54.61
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€49.40
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
Edging & outside wall corners profiles

QUADEC-PQ - Colored PVC square edge profile

153
€8.15
Colored PVC square edge profile model that work as decorative profiles to make corner corners for tiles on walls with ceramic coverings.
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
€20.31
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Accesories for balcony Profiles

BARA-RTKEG - internal angle 90°

153
€54.61
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKEG - external angle 90°

153
€54.61
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€18.34
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
€34.63
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Accesories for balcony Profiles

BARA-RKKE - External angle of 135 °

153
€51.02
External angle 135 ° for BARA-RKKE. T-shaped aluminum drip profile with water drop. The perforated profile protects and cleans tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° internal angle

153
€51.02
90 ° internal angle for T-shaped aluminum pouring water profile with BARA-RKKE drip. The perforated profile protects tile edges.
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€47.83
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Accessibility and Safety

Novonivel Access - Transition profile

165
€82.24
Transition profile made of aluminum and designed to avoid discon-tinuities in the pavement. The profile has a wide and smoothed visi-ble side with small grooved that favor the slide resistance. Delivered with countersunk holes to improve its fixing by using screws (not included).
Accesories for balcony Profiles

BARA-RKKE - 90 ° exterior angle

153
€51.02
External angle of 90 ° for BARA-RKKE. Pouring profile for T-shaped balconies. The profile keeps edges of tiles and coverings.
Accessibility and Safety

Novonivel 2 - Ramp Transition Profile For Tile

165
€21.03
Ramp Transition Profile For Tile to avoid the difference of level created when laying floorings at a different height as when a new flooring is layed onto an old one. It is specially designed to be placed after having placed the flooring. It will be fixed with a silicone-type adhesive. It is available in anodized silver matt finish.
Skirting and coved-shaped profiles

Novorodapie Maxi - Skirting board for technical raised floors

165
€113.73
Skirting board, socket or profile designed to be installed as a finish off for technical raised floors interraces, balconies, runways, swimmingpool floors, etc. Delivered in kit with all the necessary elements for the installation and its adjustment during the installation work. Fits with any kind of plot for raised floors and has a quick and easy...
Floor and wall bridge joints

DILEX-EF - Floor or wall meeting board

153
€17.58
Expansion joint or flexible hard / soft plastic meeting as a meeting joint for interior corners between walls or floor / wall delivery.
Floor and wall bridge joints

DILEX-AHKA - cove-shaped profile sanitary aluminum

153
€73.08
Coveshaped aluminium profiles for internal wall corners, kitchen worktops, or surfaces with ceramic coverings. Schlüter®-DILEX-AHK/- AHKA profiles are available in a variety of anodised finishes. 
Accessibility and Safety

Novonivel - Aluminum transition ramp profile

165
€31.51
Ramp transition profile to avoid the difference of level created when laying floorings at different height, as when a new flooring is layed onto an old one. This is very common in restoration works.
€62.32
Transition profile in the form of ramp whose function is to save the unevenness that occurs when placing pavements at different heights. In rehabilitation or renovation works, for example, this occurs when laying new flooring on top of the old one. Manufactured in stainless steel with brushed finish, which gives it greater resistance and an aesthetic...
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€39.24
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
€12.95
Novosuelo ASTRA Kombu is a stair nosing profile designed for the protection of the edges of ceramic stair treads made of an extra resistant polymer. This profile is versatile to protect and decorate the edges of ceramic tiles, floor separator, worktop edging, steps, etc.
Profile Accessories

QUADEC-MC - angle

153
€4.44
Angle accessory for QUADEC-MC. High quality chrome-plated brass trim profile for outer corners of ceramic clad walls.
Profile Accessories

QUADEC-E - angle

153
€4.50
Angle for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-E - plug

153
€2.29
Plug accessory for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Accesories for balcony Profiles

BARA-RAKEG - External angle of 135 °

153
€54.46
External angle 135 ° for BARA-RAKEG. Aluminum pouring profile with dropper for placement on a mortar with slope.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Accesories for balcony Profiles

BARA-RAKEG - 90 ° internal angle

153
€54.46
Internal angle 90 ° for BARA-RAKEG. Water pouring profile with dropper for placement on a mortar with slope.
Profile Accessories

QUADEC-A - Angle

153
€4.44
Angle for QUADEC-A. High quality anodized aluminum trim profile for exterior corners of walls covered with ceramic tiles.
Accesories for balcony Profiles

BARA-RAKEG - 90 ° external angle

153
€54.46
External angle 90 ° for BARA-RAKEG. Water pouring profile with dropper for placement on a mortar with slope.
Profile Accessories

QUADEC-AC - angle

153
€4.44
Angle accessory for QUADEC-AC. High quality anodized aluminum finish profile for exterior corners of ceramic walls.
Accesories for balcony Profiles

BARA-RAKE - 135 ° external angle

153
€60.49
External angle 135 ° for BARA-RAKE. Aluminum pouring profile with dropper for placement on a mortar with slope.
Profile Accessories

QUADEC-TS - angle

153
€11.89
Angle for QUADEC-TS. High quality aluminum trim profile with relief for exterior corners of walls covered with ceramic tiles.
Accesories for balcony Profiles

BARA-RAKE - 90 ° internal angle

153
€60.49
Internal angle 90 ° for BARA-RAKE. Profile gutter for balconies with dropper for placement on a mortar with slope.
Edging & outside wall corners profiles

Novolistel 3 Inox - Stainless steel corner edge profile

165
€55.50
Square section profile, made of AISI304 stainless steel, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Accesories for balcony Profiles

BARA-RAKE - 90 ° external angle

153
€60.49
External angle 90 ° for BARA-RAKE. Profile gutter for balconies with dropper for placement on a mortar with slope.
Profile Accessories

QUADEC-PQ - angle

153
€1.82
Angle accessory for QUADEC-PQ. Colored PVC profile for the external corners and corners in walls with ceramic coverings.
Edging & outside wall corners profiles

Novolistel 3 Alum - Aluminum corner edge profile

165
€25.32
Square section profile, made of Aluminum, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Profile Accessories

RONDEC-E - Special splice piece

153
€2.26
RONDEC-E and SCHIENE-E splicing accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Decorative joints profiles for tiles

Novolistel Maxi - Decorative border square profile

165
€16.71
Decorative profiles of square section, suitable for listel, separator, corner, step, etc. Novolistel is made of composite (Wood Plastic Composites) and it´s suitable for many different situations arising in thin bed adhesive tile coverings. This special symmetrical square profile is recommended for multiple finishing effects. 
Profile Accessories

RONDEC-A - external angle

153
€3.57
Accessory for external angle. RONDEC-A is an anodized aluminum profile for wall corners with ceramic coatings.
Profile Accessories

RONDEC-A - internal angle

153
€3.57
Internal angle accessory for RONDEC-A. Anodized aluminum profile for wall corners with ceramic cladding.
€38.55
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Profile Accessories

RONDEC-AC - External angle

153
€3.57
External angle accessory for RONDEC-AC. Rounded aluminum corner profile lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-AC - Internal Angle

153
€3.57
Internal angle for RONDEC-AC. Rounded aluminum corner bar lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-PRO - external angle

153
€1.89
Accessory for external angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRO - internal angle

153
€1.89
Accessory for internal angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-TS - external angle

153
€11.89
RONDEC-TS external angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-TS - internal angle

153
€11.89
RONDEC-TS internal angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-PRG - External angle

153
€1.89
RONDEC-PRG - external angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRG - Internal Angle

153
€1.89
RONDEC-PRG - internal angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-STEP-CT - External angle of 90º

153
€29.78
External angle of 90º for aluminum corner profile RONDEC-STEP-CT for edge protection for kitchen countertops with ceramic coverings.
Profile Accessories

RONDEC-STEP-CT - Internal angle of 90º

153
€29.78
Internal angle of 90º for corner profile or countertop guard RONDEC-STEP-CT for protection of edges or edges of kitchen countertops.
Profile Accessories

RONDEC-STEP-CT - 135º internal angle

153
€29.78
Internal angle of 135º for RONDEC-STEP-CT corner profile. Aluminum profile for edge protection on kitchen countertops with ceramic coatings.
€29.78
Internal angle 90º for RONDEC-STEP. Profile for singing countertops and ceramic tile steps. For the singing of countertops and ceramic steps.
Profile Accessories

RONDEC-STEP - 135º internal angle

153
€29.78
Internal angle 135 for RONDEC-STEP aluminum corner. Edge protection profile of ceramic countertops and steps.
Profile Accessories

INDEC - External angle

153
€4.65
External angle accessory for INDEC. Profile of anodized aluminum corners for exterior corners of walls and finishes of ceramic coatings.
Profile Accessories

Novobisel - Outer corner

165
€8.18
Bevelled aluminum corner for use as a protective and decorative edge in corners of walls covered with ceramic tiles, as well as skirting boards or tiled walls at medium height.
Profile Accessories

Novobisel - Inside Corner

165
€8.88
Bevelled aluminum corner for use as a protective and decorative edge in corners of walls covered with ceramic tiles, as well as skirting boards or tiled walls at medium height.
Product added to wishlist
Product added to compare.