Home

Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Stainless steel profile as a trim in joints floors

165
€99.61
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Aluminum floor separator profile

165
€27.56
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosuelo / Novopared - Aluminium Straight Edge Trim

165
€31.90
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
DILEX-BT
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€107.19
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
SCHIENE SCHIENE 2
Floors profiles

SCHIENE - Tile corner edge protection profile

153
€14.68
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
Novojunta Pro Metal 50 - Aluminum structural expansion joint
Structural expansion joints

Novojunta Pro Metal 50 - Aluminum structural expansion joint

165
€376.02
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
KERDI-KERS-R - esquina derecha
Waterproofing membranes

KERDI-KERS-R - Right corner

153
€14.78
Complements of prefabricated welded parts of right corner for waterproofing sheet. For making right corner in work showers.
KERDI-KERS-L - esquina izquierda
Waterproofing membranes

KERDI-KERS-L - Left corner

153
€14.78
Accessory of prefabricated welded parts of left corner for KERDI waterproofing sheet special for work showers.
TREP-G-B - ancho - R11
Stairs nosing profiles

TREP-GB - Stainless steel stair nosing profiles

153
€143.26
Stair nosing profiles with wide non-slip tape (Width 55 mm). Made of brushed stainless steel with a non-slip steppable part. R11 classified according to DIN 51 130.
WINKEL
Edging & outside wall corners profiles

WINKEL - L-shaped solid aluminum profile

153
€13.80
Solid non-perforated angular aluminum profile for different fields of application. It can be used as corners or corners for tiles that receive frequent blows or impacts. As a decorative finish or as a transition profile between orthogonal walls of different materials.
Aluminum angle for recessed doormat frame
Entrance matting systems

Angle frame profile for built-in doormat

€54.53
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
DILEX-KS
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€56.24
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
DILEX-KSA
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€33.85
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
DILEX-AKWS
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€51.78
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
RAMP RAMP 2
Home

RENO-RAMP - Ramp profile for pavements transition

153
€92.48
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
DILEX-BWB DILEX-BWB 2
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€23.47
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
Antibacterial sanitary profile
Edging & outside wall corners profiles

Novobañera 3 PVC - Antibacterial sanitary profile

165
€8.28
Antibacterial PVC sanitary profile especially suitable for placement after completion of the tiling work.Avoid leaks and humidity at the junction between tiling and bathtubs or countertops. It also absorbs the vibrations of the hydromassage systems, avoiding flaws in the tiling over time.
Escocia PVC sanitaria barras 2,5 m
Walls, Floor and countertops profiles

Novoescocia 4 PVC - Cove-shaped profile overlaid

165
€14.90
Cove-shaped profile made of PVC to be installed in tiled installations for easy cleaning the joints. Very easy to install using mastics or adhesives type silicone which also act like a sealing.  Slightly flexible to adapt to the irregularities of any wall or floor.
DILEX-EKE DILEX-EKE 2
Floor and wall bridge joints

DILEX-EKE - Floor or wall meeting board

153
€17.58
DILEX-EKE expansion or meeting board. Flexible plastic profile for corner joints, corners or for the connection between floor and wall.
Novoescocia 4 PVC - Cove-shaped profile overlaid
Walls, Floor and countertops profiles

Novoescocia 4 PVC - Side cover

165
€8.26
Lateral cover for sanitary escocia or half-round profile made of PVC for installation on already tiled surfaces in order to facilitate the cleaning of the joints. Very easy to fix using silicone or adhesive mastics that preserve watertightness.
QUADEC-E - ángulo
Profile Accessories

QUADEC-E - angle

153
€4.50
Angle for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
QUADEC-E - tapón
Profile Accessories

QUADEC-E - plug

153
€2.29
Plug accessory for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
DILEX-HKS - esquinas
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
TROBA-LINE-TL/H TROBA-LINE-TL/H 2
Drainage of bathrooms, balconies and terraces

TROBA-LINE-TL / H - Height regulator accessory

153
€25.09
Height regulator, which facilitates the installation of TROBA-LINE-TL and TROBA-LINE-TLR perforated drainage channels at varying heights up to 40 mm.
Junta Estructural Basica 20 mm barras 2,5 m Junta Estructural Basica 20 mm barras 2,5 m 2
Structural expansion joints

Novojunta Pro Móvil - Smooth finish structural expansion joint

165
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
View
Novojunta Pro Metal 50 - Aluminum structural expansion joint
Structural expansion joints

Novojunta Pro Metal 60 - Aluminum structural expansion joint

165
€393.84
Structure expansion joints up to 60 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas.  DELIVERY TIME 7-10 DAYS APPROXIMATELY
Novojunta Pro Metal 50 - Aluminum structural expansion joint
Structural expansion joints

Novojunta Pro Metal 30 - Aluminum structural expansion joint

165
€230.45
Structure expansion joints up to 30 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
Home
Product added to wishlist
Product added to compare.

SPECIAL OFFER

August 1-11, 2025
10% discount on all products using coupon: VAC25


IMPORTANT NOTICE

Due to the August holiday period, orders placed between August 1-11, 2025 will be processed starting Tuesday, August 12.
We apologize for the inconvenience.