Home

BARA-RTKE - splice BARA-RTKE - splice 2
Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
BARA-RTKE - external angle 135 °
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
BARA-RTKEG
Balcony Profiles

BARA-RTKEG - Finishing profiles for the exposed edges

153
€105.12
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
BARA-RTKE - internal angle 90 °
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
BARA-RTKE - external angle 90 °
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
BARA-RAKE BARA-RAKE 2
Balcony Profiles

BARA-RAKE - Dripper profile for DITRA-DRAIN

153
€135.07
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
BARA-RAKEG - Aluminum sheet gutter DITRA 25 BARA-RAKEG - Aluminum sheet gutter DITRA 25 2
Balcony Profiles

BARA-RAKEG - Dripper profile for DITRA 25

153
€109.25
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosuelo / Novopared - Aluminium Straight Edge Trim

165
€20.02
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
DILEX-BT
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€103.98
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
BARA-RKK
Balcony Profiles

BARA-RKK - Aluminum balcony gutter profile

153
€84.06
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
SCHIENE SCHIENE 2
Floors profiles

SCHIENE - Tile corner edge protection profile

153
€14.28
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
BARA-RKKE - Aluminum balcony gutter profile
Balcony Profiles

BARA-RKKE - Aluminum balcony gutter profile

153
€109.80
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
BARA-RKK - empalme BARA-RKK - empalme 2
Accesories for balcony Profiles

BARA-RKK - Splicing Space Piece

153
€3.54
Splice for T-shaped gutter profile with dropper, which is placed on a slope with slope.
TREP-G-B - ancho - R11
Stairs nosing profiles

TREP-GB - Stainless steel stair nosing profiles

153
€143.26
Stair nosing profiles with wide non-slip tape (Width 55 mm). Made of brushed stainless steel with a non-slip steppable part. R11 classified according to DIN 51 130.
Home
Product added to wishlist
Product added to compare.