Home

Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
€103.98
Finishing profile for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of Schlüter JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile with slimm visible side made of aluminium or brass which can be curvable, designed to cover joints and separate floorings. This profile, due to its dimensions, is intended to be installed before or after the tiling. The brass model has two heights available. The profile is perfect to be installed in floorings like marble or terrazzo as it can be...
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
€135.07
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
Complete set for floor-level linear showers with horizontal outlet with integrated reverse siphon. Suitable for installation in a central area as well as in a wall area. Complies with DIN EN 1253 with a drainage capacity ≥ 0.8 l/s and an internal water storage height of 50 mm. (Grating and frame not included)
€109.25
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Accesories for balcony Profiles

BARA-RTK - splice

153
€3.12
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - external angle 135°

153
€58.15
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Balcony Profiles

BARA-RW - Dripper L-shaped profile

153
€69.83
L-shaped finishing profile made of stainless steel or colour coated aluminium for the exposed edges of balconies and terraces. The profile produces a visually appealing edge finish and protects the exposed edges of the structural slab from weather and corrosion. 
Accesories for balcony Profiles

BARA-RTK - internal angle 90°

153
€52.82
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - external angle 90°

153
€52.82
External angle 90 ° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
€84.06
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€18.60
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€109.80
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
Product added to wishlist
Product added to compare.