Home

Walls, Floor and countertops profiles

Novobisel - Decorative beveled tile corner

165
€28.92
Bevelled aluminum corner for use as a protective and decorative edge in corners of walls covered with ceramic tiles, as well as skirting boards or tiled walls at medium height.Its face seen in bezel finished off with a delicate edge, integrates with the coating providing a fine and elegant finish.
Aluminium stair nosing profile to protect and decorate stairs covered with ceramic. The design of its recess allows the installation of any LED strip without the need for a diffuser, giving the profile a greater decorative charge. Its visible anti-slip face contributes to increasing the safety of the staircase. Dimensions a = 22 mm / h = 10 - 12 mm
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Expansion joint which consists of a central body made of flexible EPDM and two metal sides. One of the sides acts like a cover plate, hiding the rubber inside. This expansion joint has two different functions: is functional, as it absorbs expansions and contractions, and decorative.
€61.93
Novopeldaño MaxiTokyo is a stair nosing made of Maxi, an exclusive raw material of WPC (Wood Plastic Composite) family of products. Its particular geometry and appearance contribute to embellish all kind of stairs, specially the rustic ones, being the perfect alternative to natural wood profiles.d of stairs, specially the rustic ones, being the perfect...
Edging & outside wall corners profiles

Novopared Novosuelo - PVC edge corner profile

165
€5.61
PVC corners for wall or floor economical modern line at right angles as a finish to protect and decorate corners of ceramic tiles.  Profile with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floors or walls between 6 and 12 mm in height.
Decorative joints profiles for tiles

Novolistel MaxiSahara - Decorative border square profile

165
€23.18
Square section profile made of PVC with the addition of vegetable fibres from recycled organic waste.Fluted finish that can be installed both indoors and outdoors, providing protection for corners. Available in various colours to provide a solution to multiple trends.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Edging & outside wall corners profiles

Novopilastra - Aluminum corners profile

165
€33.79
Profile of anodized aluminum based on simple, pure and perfect shapes. It is perfect to finish and protect wall corners and work surfaces and to beautify wall tiles in an industrial style environment. Currently, it is one of the most important decorative trends.
Accessibility and Safety

Novotop Access Steel - Podotactile button

165
€452.93
Novotop Access Steel tactile buttons are made of zinc plated steel and designed as a warning solution to identify areas with obstacles. To create a tactile floor.
Accessibility and Safety

Novotop Access Aluminium - Podotactile Buttons

165
€1,716.02
Novotop Access Aluminium tactile buttons are designed as a warning solution to identify areas with obstacles. To create tactile flooring and improve accessibility.
€9.31
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€56.54
Stair nosing made of Maxi, an exclusive raw material of WPC (Wood Plastic Composite) family of products. Its particular geometry and appearance contribute to embellish all kind of stairs, specially the rustic ones, being the perfect alternative to natural wood profiles.
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
€78.19
New MaxiDakar rungs are profiles for stair treads or stair nosing designed for the protection of ceramic tread edges made of Maxi material. This material belongs to the family of WPC (Wood Plastic Composites). MAxidakar staircases for stairs incorporate vegetable fibers in their composition.
Accessories for stair steps

Novopeldaño 4 - Side cover

165
€3.04
Aluminium side cover accessory for Novopeldaño 4 anti-slip stair treads or stair nosing profiles. Stair nosing profile to protect and decorate stairs covered with ceramic tiles. The visible rough visible side helps to increase the safety of the staircase. 
Accessories for stair steps

Novopeldaño Eclipse - Side cover

165
€5.08
Aluminium stair nosing profile to protect and decorate stairs covered with ceramic. The design of its recess allows the installation of any LED strip without the need for a diffuser, giving the profile a greater decorative charge. Its visible anti-slip face contributes to increasing the safety of the staircase. Dimensions a = 22 mm / h = 10 - 12 mm
Accessibility and Safety

Steel tactile stud dry-embedded

275
€707.32
Steel tactile stud dry-embedded with stem to install recessed by mechanical fixation. Manufactured in galvanized steel, AISI 304 stainless steel for impact placement. Designed as a warning solution to identify areas with obstacles. For podo tactile floors and improve accessibility.(Pack of 250 units.)
Accessibility and Safety

Steel tactile stud embedded with resin

275
€505.24
Tactile studs with recessed stud for placement with resin. Made of zinc-plated steel or AISI 304 stainless steel for impact placement. Designed as a warning solution to identify areas with obstacles. To create a tactile floor or pavement and improve accessibility. (Pack of 250 units)
Aluminium profiles or ramp end caps with flange or fin for connection. Transition profile with a wide visible face whose surface has been grooved to offer greater resistance to slipping. Its reinforced base allows it to withstand loads and a high level of traffic. This profile is made of anodised aluminium, so it can be installed outdoors or indoors.
€17.10
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Slim ramp profile made of aluminum designed to avoid discontinuities in floorings such as low thickness ceramic , vinyl floorings or carpets. The profile has a wide and smoothed visible side with small grooved that favor the slide resistance. Available in anodized aluminum anod. matt silver. Delivered with countersunk holes to improve its fixing by using...
Accesories for balcony Profiles

BARA-RKB - External angle of 135 °

153
€39.71
External angle 135 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - 90 ° internal angle

153
€38.09
Internal angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - 90 ° external angle

153
€38.09
External angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - Splice piece

153
€3.54
Splice for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accessibility and Safety

Novonivel - Aluminum transition ramp profile

165
€32.13
Ramp transition profile to avoid the difference of level created when laying floorings at different height, as when a new flooring is layed onto an old one. This is very common in restoration works.
€68.12
Transition profile in the form of ramp whose function is to save the unevenness that occurs when placing pavements at different heights. In rehabilitation or renovation works, for example, this occurs when laying new flooring on top of the old one. Manufactured in stainless steel with brushed finish, which gives it greater resistance and an aesthetic...
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€24.54
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
€22.86
Step plate profile made of natural aluminum designed to be placed as an orientation and guide element for people with visual disabilities. Its grooved relief IMPROVES THE SLIP RESISTANCE (Rd) of any pavement.
€14.76
Novosuelo ASTRA Kombu is a stair nosing profile designed for the protection of the edges of ceramic stair treads made of an extra resistant polymer. This profile is versatile to protect and decorate the edges of ceramic tiles, floor separator, worktop edging, steps, etc.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Edging & outside wall corners profiles

Novolistel 3 Inox - Stainless steel corner edge profile

165
€53.42
Square section profile, made of AISI304 stainless steel, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Edging & outside wall corners profiles

Novolistel 3 Alum - Aluminum corner edge profile

165
€27.81
Square section profile, made of Aluminum, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Accessibility and Safety

Novogrip Access - Touch plate

165
Podotactile floor in plates or tiles with high contrast design with the pavement and tactile button pattern for blind or visually impaired people.
Decorative joints profiles for tiles

Novolistel Maxi - Decorative border square profile

165
€18.85
Decorative profiles of square section, suitable for listel, separator, corner, step, etc. Novolistel is made of composite (Wood Plastic Composites) and it´s suitable for many different situations arising in thin bed adhesive tile coverings. This special symmetrical square profile is recommended for multiple finishing effects. 
€23.35
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Drainage of bathrooms, balconies and terraces

TROBA-PLUS - Draining film with veil

153
€212.04
Drainage sheet that evacuates water safely. The conical nodules are highly resistant and covered with a permeable veil.
Profile Accessories

Novobisel - Outer corner

165
€8.18
Bevelled aluminum corner for use as a protective and decorative edge in corners of walls covered with ceramic tiles, as well as skirting boards or tiled walls at medium height.
Profile Accessories

Novobisel - Inside Corner

165
€8.88
Bevelled aluminum corner for use as a protective and decorative edge in corners of walls covered with ceramic tiles, as well as skirting boards or tiled walls at medium height.
Product added to wishlist
Product added to compare.

SPECIAL OFFER

August 1-11, 2025
10% discount on all products using coupon: VAC25


IMPORTANT NOTICE

Due to the August holiday period, orders placed between August 1-11, 2025 will be processed starting Tuesday, August 12.
We apologize for the inconvenience.