Home

BARA-RTKE - splice BARA-RTKE - splice 2
Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
VINPRO-T - T-shaped profile to transitions of the same height VINPRO-T - T-shaped profile to transitions of the same height 2
Floors profiles

VINPRO-S - U-shaped profile for edge protection

153
€21.14
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
SCHIENE-STEP - Cantonera de aluminio para encimera SCHIENE-STEP - Cantonera de aluminio para encimera 2
Edge countertop profiles

SCHIENE-STEP - Aluminum worktop corner

€69.43
Decorative profiles for the protection of the edges and edges of kitchen countertops. Aluminum profiles for shelves, stair steps or countertops.
BARA-RTKE - external angle 135 °
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
BARA-RTKEG
Balcony Profiles

BARA-RTKEG - Finishing profiles for the exposed edges

153
€101.68
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
BARA-RTKE - internal angle 90 °
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
RONDEC-E - ángulo externo
Profile Accessories

RONDEC-E - external angle

153
€3.63
External angle accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
BARA-RTKE - external angle 90 °
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
TREP-B
Embedded stair profile

TREP-B - Anti-slip stair nosing trim

153
€78.76
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
RONDEC-E - ángulo interno
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZC - U-shaped stainless steel profile with single perforation

153
€56.32
Brushed stainless steel profile in U-shape with single perforation. Suitable for fixing and mounting Schluter KERDI-BOARD panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for finishing kitchen worktops and utility rooms.
BARA-RAKE BARA-RAKE 2
Balcony Profiles

BARA-RAKE - Dripper profile for DITRA-DRAIN

153
€134.47
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
RONDEC-E - tapón
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Stainless steel profile as a trim in joints floors

165
€97.86
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZA - U-shaped stainless steel profile with double perforation

153
€56.32
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
BARA-RAKEG - Aluminum sheet gutter DITRA 25 BARA-RAKEG - Aluminum sheet gutter DITRA 25 2
Balcony Profiles

BARA-RAKEG - Dripper profile for DITRA 25

153
€108.63
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Aluminum floor separator profile

165
€25.22
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosuelo / Novopared - Aluminium Straight Edge Trim

165
€29.99
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Novotop Access Acero - Botón podotáctil Novotop Access Acero - Botón podotáctil 2
Accessibility and Safety

Novotop Access Steel - Podotactile button

165
€452.93
Novotop Access Steel tactile buttons are made of zinc plated steel and designed as a warning solution to identify areas with obstacles. To create a tactile floor.
Home
Product added to wishlist
Product added to compare.