Home

Complete set for floor-level linear showers with horizontal outlet with integrated reverse siphon. Suitable for installation in a central area as well as in a wall area. Complies with DIN EN 1253 with a drainage capacity ≥ 0.8 l/s and an internal water storage height of 50 mm. (Grating and frame not included)
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Balcony Profiles

BARA-RW - Dripper L-shaped profile

153
€86.38
L-shaped finishing profile made of stainless steel or colour coated aluminium for the exposed edges of balconies and terraces. The profile produces a visually appealing edge finish and protects the exposed edges of the structural slab from weather and corrosion. 
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€107.19
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
€14.68
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€150.56
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
€175.18
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
Waterproofing membranes

KERDI-KERS-R - Right corner

153
€14.78
Complements of prefabricated welded parts of right corner for waterproofing sheet. For making right corner in work showers.
Balcony Profiles

BARA-RAP - Aluminum cover profile

153
€66.88
Cover profile made of colour coated aluminium. Together with the profile Schlüter BARA-RW, it covers the exposed edges of balconies and terraces. Schlüter BARA-RAP is clipped onto this carrier profile and provides a neat finishing edge while protecting the exposed screed edges from deterioration and the weather.
Waterproofing membranes

KERDI-KERS-L - Left corner

153
€14.78
Accessory of prefabricated welded parts of left corner for KERDI waterproofing sheet special for work showers.
Product added to wishlist
Product added to compare.