Home

BARA-RAK BARA-RAK 2
Balcony Profiles

BARA-RAK - Dripper profile for balcony edge

153
€91.13
Finishing dripper profile for balcony or terrasse edge with drip lip for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of the Schlüter-RONDEC or Schlüter-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZC - U-shaped stainless steel profile with single perforation

153
€61.54
Brushed stainless steel profile in U-shape with single perforation. Suitable for fixing and mounting Schluter KERDI-BOARD panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for finishing kitchen worktops and utility rooms.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Stainless steel profile as a trim in joints floors

165
€99.61
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZA - U-shaped stainless steel profile with double perforation

153
€61.54
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Aluminum floor separator profile

165
€27.56
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosuelo / Novopared - Aluminium Straight Edge Trim

165
€31.90
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
DILEX-BT
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€107.19
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
SCHIENE SCHIENE 2
Floors profiles

SCHIENE - Tile corner edge protection profile

153
€14.68
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
BARA-RKL BARA-RKL 2
Balcony Profiles

BARA-RKL - Dripper aluminium profile

153
€143.21
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Novojunta Pro Metal 50 - Aluminum structural expansion joint
Structural expansion joints

Novojunta Pro Metal 50 - Aluminum structural expansion joint

165
€416.96
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
BARA-RKLT - Dripper aluminium profile
Balcony Profiles

BARA-RKLT - Dripper aluminium profile

153
€168.01
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
KERDI-KERS-R - esquina derecha
Waterproofing membranes

KERDI-KERS-R - Right corner

153
€14.78
Complements of prefabricated welded parts of right corner for waterproofing sheet. For making right corner in work showers.
KERDI-KERS-L - esquina izquierda
Waterproofing membranes

KERDI-KERS-L - Left corner

153
€14.78
Accessory of prefabricated welded parts of left corner for KERDI waterproofing sheet special for work showers.
WINKEL
Edging & outside wall corners profiles

WINKEL - L-shaped solid aluminum profile

153
€13.80
Solid non-perforated angular aluminum profile for different fields of application. It can be used as corners or corners for tiles that receive frequent blows or impacts. As a decorative finish or as a transition profile between orthogonal walls of different materials.
Aluminum angle for recessed doormat frame
Entrance matting systems

Angle frame profile for built-in doormat

€54.53
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
Linox esquinero inoxidable sobrepuesto Linox esquinero inoxidable sobrepuesto 2
Movement joint

Novojunta 1 - PVC floor expansion joint

165
€14.08
Profile for expansion joints, manufactured in coextruded PVC, formed by body, rigid and flexible, which allows to absorb small variations of movement offering good resistance.
Novojunta 1 - PVC floor expansion joint
Movement joint

Novojunta Decor Flecha - Aluminum floor expansion joint

165
€136.42
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
RAMP RAMP 2
Home

RENO-RAMP - Ramp profile for pavements transition

153
€92.48
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Novojunta Metallic Flecha - Aluminum floor expansion joint
Movement joint

Novojunta Metallic Flecha - Aluminum floor expansion joint

165
€133.75
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
DILEX-BWB DILEX-BWB 2
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€23.47
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
Novorodapie Maxi - Skirting board or composite cable gland Novorodapie Maxi - Skirting board or composite cable gland 2
Skirting and coved-shaped profiles

Novorodapie Maxi - Skirting board for technical raised floors

165
€133.95
Skirting board, socket or profile designed to be installed as a finish off for technical raised floors interraces, balconies, runways, swimmingpool floors, etc. Delivered in kit with all the necessary elements for the installation and its adjustment during the installation work. Fits with any kind of plot for raised floors and has a quick and easy...
BARA-RAK - ángulo externo 90° BARA-RAK - ángulo externo 90° 2
Accesories for balcony Profiles

BARA-RAK - 90 ° external angle

153
€48.58
External angle 90 ° for colored aluminum pouring profile, which is placed on the edge of the terrace or balcony as a drip.
BARA-RAK - ángulo interno 90° BARA-RAK - ángulo interno 90° 2
Accesories for balcony Profiles

BARA-RAK - 90 ° internal angle

153
€48.58
Internal angle 90 ° for colored aluminum pouring profile, which is placed on the edge of the terrace or balcony.
BARA-RAK - ángulo externo 135° BARA-RAK - ángulo externo 135° 2
Accesories for balcony Profiles

BARA-RAK - External angle of 135 °

153
€53.47
External angle 135 ° for colored aluminum pouring profile. Goterón that is placed on the edge of the terrace or balcony.
BARA-RKL - ángulo externo 135° BARA-RKL - ángulo externo 135° 2
Accesories for balcony Profiles

BARA-RKL - External angle of 135 °

153
€81.75
External angle of 135 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
BARA-RKL - ángulo interno 90° BARA-RKL - ángulo interno 90° 2
Accesories for balcony Profiles

BARA-RKL - 90 ° internal angle

153
€81.75
Internal angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
BARA-RKL - ángulo externo 90° BARA-RKL - ángulo externo 90° 2
Accesories for balcony Profiles

BARA-RKL - 90 ° external angle

153
€81.75
External angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
BARA-RAM - ángulo externo 135° BARA-RAM - ángulo externo 135° 2
Accesories for balcony Profiles

BARA-RAM - External angle of 135 °

153
External angle 135 ° for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
View
BARA-RAM - ángulo interno 90° BARA-RAM - ángulo interno 90° 2
Accesories for balcony Profiles

BARA-RAM - 90 ° internal angle

153
€37.49
90 ° internal angle for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
View
BARA-RAM - ángulo externo 90° BARA-RAM - ángulo externo 90° 2
Accesories for balcony Profiles

BARA-RAM - 90 ° external angle

153
€37.49
90 ° external angle for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
View
BARA-RKL - empalme BARA-RKL - empalme 2
Accesories for balcony Profiles

BARA-RKL - Splice part

153
€6.80
Special accessory to tie or splice profiles BARA-RKL. Pouring for balconies with lacquered aluminum drain.
BARA-RKLT - external angle 135 °
Accesories for balcony Profiles

BARA-RKLT - external angle 135°

153
€85.37
External angle 135 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
BARA-RKLT - internal angle 90 °
Accesories for balcony Profiles

BARA-RKLT - internal angle 90°

153
€85.37
Internal angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
BARA-RKLT - external angle 90 °
Accesories for balcony Profiles

BARA-RKLT - external angle 90°

153
€85.37
External angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
TROBA-LINE-TL/H TROBA-LINE-TL/H 2
Drainage of bathrooms, balconies and terraces

TROBA-LINE-TL / H - Height regulator accessory

153
€25.09
Height regulator, which facilitates the installation of TROBA-LINE-TL and TROBA-LINE-TLR perforated drainage channels at varying heights up to 40 mm.
Junta Estructural Basica 20 mm barras 2,5 m Junta Estructural Basica 20 mm barras 2,5 m 2
Structural expansion joints

Novojunta Pro Móvil - Smooth finish structural expansion joint

165
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
View
Novojunta Pro Metal 50 - Aluminum structural expansion joint
Structural expansion joints

Novojunta Pro Metal 60 - Aluminum structural expansion joint

165
€447.11
Structure expansion joints up to 60 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas.  DELIVERY TIME 7-10 DAYS APPROXIMATELY
Novojunta Pro Metal 50 - Aluminum structural expansion joint
Structural expansion joints

Novojunta Pro Metal 30 - Aluminum structural expansion joint

165
€299.58
Structure expansion joints up to 30 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
Home
Product added to wishlist
Product added to compare.

SPECIAL OFFER

August 1-11, 2025
10% discount on all products using coupon: VAC25


IMPORTANT NOTICE

Due to the August holiday period, orders placed between August 1-11, 2025 will be processed starting Tuesday, August 12.
We apologize for the inconvenience.