Home

Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
Outside corner for skirting board made of stainless steel AISI304. Fast and very simple to place with usual adhesives. Discontinued product - Available while stocks last - Please ask for details
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
€136.47
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
€110.61
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Skirting and coved-shaped profiles

DESIGNBASE-CQ - Aluminium cable hiding skirting

153
€73.58
Cable hiding plinth in lacquered or anodized aluminum with cable duct and installations. High-quality aluminium skirting profile made from colour-coated or anodised aluminium for creating skirting covers with an integrated cable duct.
Accessibility and Safety

Novotop Access Aluminium - Podotactile Buttons

165
€1,716.02
Novotop Access Aluminium tactile buttons are designed as a warning solution to identify areas with obstacles. To create tactile flooring and improve accessibility.
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€107.19
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Skirting and coved-shaped profiles

DESIGNBASE-SL - Aluminum skirting profile

153
€34.44
Baseboard profile lacquered or anodized aluminum. The metal skirting board is fixed to the wall with a suitable adhesive. High-quality coated or anodised aluminium for the quick creation of decorative skirtings.
€14.68
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€115.60
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€82.49
Aluminum LED skirting board profile with numerous applications that can be used as a plinth or end profile on vertical surfaces. Aluminum profiles with a visible surface of 10 mm width and a free space of 39 mm, which offer the possibility of housing different LED strips inserted into it. (Profile only, does not include diffuser or LED lights)
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
Plinths accesories

DESIGNBASE-SL - Left cap

153
€12.52
Left cap for skirting board DESIGNBASE-SL. It is easily fixed to the wall area with a suitable adhesive.
Plinths accesories

DESIGNBASE-SL - Right plug

153
€12.52
Right plug for skirting board DESIGNBASE-SL. It is easily fixed to the wall area with a suitable adhesive.
Plinths accesories

DESIGNBASE-SL - Splice

153
€12.52
Splice for skirting board DESIGNBASE-SL. It is easily fixed to the wall area with a suitable adhesive.
Skirting and coved-shaped profiles

Flexible vinyl resin skirting board 60/120

281
€194.99
Flexible vinyl resin skirting board (PVC) (Roll of 50 meters). Its flexibility and robustness make it a highly functional profile. PVC skirting board with a hatch finish makes it easy to clean, avoiding germs. Adheres with polyurethane mastic or contact glue. (Delivery time approx. 15 days)
€29.12
External angle in anodized aluminum for the creation of skirting boards or valances. For the DESIGNBASE-QD series of profiles with LED lighting strips.
Waterproofing membranes

KERDI-KERS-R - Right corner

153
€14.78
Complements of prefabricated welded parts of right corner for waterproofing sheet. For making right corner in work showers.
Waterproofing membranes

KERDI-KERS-L - Left corner

153
€14.78
Accessory of prefabricated welded parts of left corner for KERDI waterproofing sheet special for work showers.
Skirting and coved-shaped profiles

Novorodapie semiflex - Semi flexible PVC skirting

165
€21.62
Semiflex PVC skirting board is a profile made of semi-flexible white or gray PVC. Flexibility highly functional adaptability. White or gray skirting board.
Accesories for balcony Profiles

BARA-RKK - Splicing Space Piece

153
€3.54
Splice for T-shaped gutter profile with dropper, which is placed on a slope with slope.
Edging & outside wall corners profiles

WINKEL - L-shaped solid aluminum profile

153
€13.80
Solid non-perforated angular aluminum profile for different fields of application. It can be used as corners or corners for tiles that receive frequent blows or impacts. As a decorative finish or as a transition profile between orthogonal walls of different materials.
Skirting and coved-shaped profiles

Flexible PVC skirting board by rolls

275
€127.21
Economic profile flexible PVC skirting board and intended for placement as a PVC base. Auction in cove-shaped profile for easy cleaning, avoiding germs. White skirting board.
Entrance matting systems

Angle frame profile for built-in doormat

€54.53
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€117.07
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€70.23
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Skirting and coved-shaped profiles

Novorodapie L - Anodized aluminum skirting board

165
€49.86
Aluminum skirting board or decorative plinth profile, with an elegant simple design. Metal skirting board with straight lines, easy and quick installation. The profile contoured ends give a snug fit on the wall covering over the bottom perimeter along the dilatation gap joint, thus ensuring the necessary expansion movement to the floor.
Accesories for balcony Profiles

BARA-RTKEG - external angle 135°

153
€54.61
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€54.27
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
€17.10
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Accesories for balcony Profiles

BARA-RTKEG - internal angle 90°

153
€54.61
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Accesories for balcony Profiles

BARA-RTKEG - external angle 90°

153
€54.61
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€23.47
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
Accesories for balcony Profiles

BARA-RKKE - External angle of 135 °

153
€51.02
External angle 135 ° for BARA-RKKE. T-shaped aluminum drip profile with water drop. The perforated profile protects and cleans tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° internal angle

153
€51.02
90 ° internal angle for T-shaped aluminum pouring water profile with BARA-RKKE drip. The perforated profile protects tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° exterior angle

153
€51.02
External angle of 90 ° for BARA-RKKE. Pouring profile for T-shaped balconies. The profile keeps edges of tiles and coverings.
Accesories for balcony Profiles

BARA-RKB - External angle of 135 °

153
€39.71
External angle 135 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - 90 ° internal angle

153
€38.09
Internal angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Plinths accesories

DESIGNBASE-SL - External angle 90

153
€12.52
External angle 90º for DESIGNBASE-SL baseboard. It is easily fixed to the wall area with a suitable adhesive.
Accesories for balcony Profiles

BARA-RKB - 90 ° external angle

153
€38.09
External angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - Splice piece

153
€3.54
Splice for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€24.54
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
€22.86
Step plate profile made of natural aluminum designed to be placed as an orientation and guide element for people with visual disabilities. Its grooved relief IMPROVES THE SLIP RESISTANCE (Rd) of any pavement.
Accesories for balcony Profiles

BARA-RAKEG - External angle of 135 °

153
€54.46
External angle 135 ° for BARA-RAKEG. Aluminum pouring profile with dropper for placement on a mortar with slope.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Accesories for balcony Profiles

BARA-RAKEG - 90 ° internal angle

153
€54.46
Internal angle 90 ° for BARA-RAKEG. Water pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKEG - 90 ° external angle

153
€54.46
External angle 90 ° for BARA-RAKEG. Water pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKE - 135 ° external angle

153
€60.49
External angle 135 ° for BARA-RAKE. Aluminum pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKE - 90 ° internal angle

153
€60.49
Internal angle 90 ° for BARA-RAKE. Profile gutter for balconies with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKE - 90 ° external angle

153
€60.49
External angle 90 ° for BARA-RAKE. Profile gutter for balconies with dropper for placement on a mortar with slope.
€23.35
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Drainage of bathrooms, balconies and terraces

TROBA-LINE-TL / H - Height regulator accessory

153
€25.09
Height regulator, which facilitates the installation of TROBA-LINE-TL and TROBA-LINE-TLR perforated drainage channels at varying heights up to 40 mm.
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
Product added to wishlist
Product added to compare.

SPECIAL OFFER

August 1-11, 2025
10% discount on all products using coupon: VAC25


IMPORTANT NOTICE

Due to the August holiday period, orders placed between August 1-11, 2025 will be processed starting Tuesday, August 12.
We apologize for the inconvenience.