Home

Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
€91.13
Finishing dripper profile for balcony or terrasse edge with drip lip for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of the Schlüter-RONDEC or Schlüter-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Brushed stainless steel profile in U-shape with single perforation. Suitable for fixing and mounting Schluter KERDI-BOARD panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for finishing kitchen worktops and utility rooms.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Accessibility and Safety

Novotop Access Aluminium - Podotactile Buttons

165
€1,716.02
Novotop Access Aluminium tactile buttons are designed as a warning solution to identify areas with obstacles. To create tactile flooring and improve accessibility.
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€107.19
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
€14.68
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€119.63
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
€143.21
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
€416.96
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
€168.01
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
Waterproofing membranes

KERDI-KERS-R - Right corner

153
€14.78
Complements of prefabricated welded parts of right corner for waterproofing sheet. For making right corner in work showers.
Waterproofing membranes

KERDI-KERS-L - Left corner

153
€14.78
Accessory of prefabricated welded parts of left corner for KERDI waterproofing sheet special for work showers.
Accesories for balcony Profiles

BARA-RKK - Splicing Space Piece

153
€3.54
Splice for T-shaped gutter profile with dropper, which is placed on a slope with slope.
Edging & outside wall corners profiles

WINKEL - L-shaped solid aluminum profile

153
€13.80
Solid non-perforated angular aluminum profile for different fields of application. It can be used as corners or corners for tiles that receive frequent blows or impacts. As a decorative finish or as a transition profile between orthogonal walls of different materials.
Entrance matting systems

Angle frame profile for built-in doormat

€54.53
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
€14.08
Profile for expansion joints, manufactured in coextruded PVC, formed by body, rigid and flexible, which allows to absorb small variations of movement offering good resistance.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
€17.10
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€23.47
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
Accesories for balcony Profiles

BARA-RKKE - External angle of 135 °

153
€51.02
External angle 135 ° for BARA-RKKE. T-shaped aluminum drip profile with water drop. The perforated profile protects and cleans tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° internal angle

153
€51.02
90 ° internal angle for T-shaped aluminum pouring water profile with BARA-RKKE drip. The perforated profile protects tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° exterior angle

153
€51.02
External angle of 90 ° for BARA-RKKE. Pouring profile for T-shaped balconies. The profile keeps edges of tiles and coverings.
Accesories for balcony Profiles

BARA-RKB - External angle of 135 °

153
€39.71
External angle 135 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - 90 ° internal angle

153
€38.09
Internal angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - 90 ° external angle

153
€38.09
External angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - Splice piece

153
€3.54
Splice for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RAK - 90 ° external angle

153
€48.58
External angle 90 ° for colored aluminum pouring profile, which is placed on the edge of the terrace or balcony as a drip.
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€24.54
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
Accesories for balcony Profiles

BARA-RAK - 90 ° internal angle

153
€48.58
Internal angle 90 ° for colored aluminum pouring profile, which is placed on the edge of the terrace or balcony.
Accesories for balcony Profiles

BARA-RAK - External angle of 135 °

153
€53.47
External angle 135 ° for colored aluminum pouring profile. Goterón that is placed on the edge of the terrace or balcony.
€22.86
Step plate profile made of natural aluminum designed to be placed as an orientation and guide element for people with visual disabilities. Its grooved relief IMPROVES THE SLIP RESISTANCE (Rd) of any pavement.
Accesories for balcony Profiles

BARA-RKL - External angle of 135 °

153
€81.75
External angle of 135 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° internal angle

153
€81.75
Internal angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° external angle

153
€81.75
External angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RAM - External angle of 135 °

153
External angle 135 ° for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RAM - 90 ° internal angle

153
€37.49
90 ° internal angle for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RAM - 90 ° external angle

153
€37.49
90 ° external angle for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RKL - Splice part

153
€6.80
Special accessory to tie or splice profiles BARA-RKL. Pouring for balconies with lacquered aluminum drain.
€23.35
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Accesories for balcony Profiles

BARA-RKLT - external angle 135°

153
€85.37
External angle 135 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Accesories for balcony Profiles

BARA-RKLT - internal angle 90°

153
€85.37
Internal angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Accesories for balcony Profiles

BARA-RKLT - external angle 90°

153
€85.37
External angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Drainage of bathrooms, balconies and terraces

TROBA-LINE-TL / H - Height regulator accessory

153
€25.09
Height regulator, which facilitates the installation of TROBA-LINE-TL and TROBA-LINE-TLR perforated drainage channels at varying heights up to 40 mm.
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
€447.11
Structure expansion joints up to 60 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas.  DELIVERY TIME 7-10 DAYS APPROXIMATELY
€299.58
Structure expansion joints up to 30 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
Product added to wishlist
Product added to compare.

SPECIAL OFFER

August 1-11, 2025
10% discount on all products using coupon: VAC25


IMPORTANT NOTICE

Due to the August holiday period, orders placed between August 1-11, 2025 will be processed starting Tuesday, August 12.
We apologize for the inconvenience.