Home

Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
€91.13
Finishing dripper profile for balcony or terrasse edge with drip lip for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of the Schlüter-RONDEC or Schlüter-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Brushed stainless steel profile in U-shape with single perforation. Suitable for fixing and mounting Schluter KERDI-BOARD panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for finishing kitchen worktops and utility rooms.
€136.47
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
€110.61
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Accessibility and Safety

Novotop Access Aluminium - Podotactile Buttons

165
€1,716.02
Novotop Access Aluminium tactile buttons are designed as a warning solution to identify areas with obstacles. To create tactile flooring and improve accessibility.
€9.31
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€115.60
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
€143.21
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
€416.96
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
€168.01
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RKK - Splicing Space Piece

153
€3.54
Splice for T-shaped gutter profile with dropper, which is placed on a slope with slope.
€14.08
Profile for expansion joints, manufactured in coextruded PVC, formed by body, rigid and flexible, which allows to absorb small variations of movement offering good resistance.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€117.07
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Walls, Floor and countertops profiles

Novoescocia 4 - Cove-shaped profile overlaid

165
€36.61
Aluminum cove-shaped profile to be installed on finished tiled installations to help cleaning the tiled corners/angles or the skirtings. It is easy to install using adhesives type silicone that maintain the sealing.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€70.23
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Accesories for balcony Profiles

BARA-RTKEG - external angle 135°

153
€54.61
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€54.27
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
€17.10
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Accesories for balcony Profiles

BARA-RTKEG - internal angle 90°

153
€54.61
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Accesories for balcony Profiles

BARA-RTKEG - external angle 90°

153
€54.61
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RKKE - External angle of 135 °

153
€51.02
External angle 135 ° for BARA-RKKE. T-shaped aluminum drip profile with water drop. The perforated profile protects and cleans tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° internal angle

153
€51.02
90 ° internal angle for T-shaped aluminum pouring water profile with BARA-RKKE drip. The perforated profile protects tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° exterior angle

153
€51.02
External angle of 90 ° for BARA-RKKE. Pouring profile for T-shaped balconies. The profile keeps edges of tiles and coverings.
Accesories for balcony Profiles

BARA-RKB - External angle of 135 °

153
€39.71
External angle 135 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - 90 ° internal angle

153
€38.09
Internal angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - 90 ° external angle

153
€38.09
External angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - Splice piece

153
€3.54
Splice for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RAK - 90 ° external angle

153
€48.58
External angle 90 ° for colored aluminum pouring profile, which is placed on the edge of the terrace or balcony as a drip.
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€24.54
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
Accesories for balcony Profiles

BARA-RAK - 90 ° internal angle

153
€48.58
Internal angle 90 ° for colored aluminum pouring profile, which is placed on the edge of the terrace or balcony.
Accesories for balcony Profiles

BARA-RAK - External angle of 135 °

153
€53.47
External angle 135 ° for colored aluminum pouring profile. Goterón that is placed on the edge of the terrace or balcony.
€22.86
Step plate profile made of natural aluminum designed to be placed as an orientation and guide element for people with visual disabilities. Its grooved relief IMPROVES THE SLIP RESISTANCE (Rd) of any pavement.
Accesories for balcony Profiles

BARA-RKL - External angle of 135 °

153
€81.75
External angle of 135 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° internal angle

153
€81.75
Internal angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° external angle

153
€81.75
External angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RAM - External angle of 135 °

153
External angle 135 ° for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RAM - 90 ° internal angle

153
€37.49
90 ° internal angle for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RAM - 90 ° external angle

153
€37.49
90 ° external angle for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RAKEG - External angle of 135 °

153
€54.46
External angle 135 ° for BARA-RAKEG. Aluminum pouring profile with dropper for placement on a mortar with slope.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Accesories for balcony Profiles

BARA-RAKEG - 90 ° internal angle

153
€54.46
Internal angle 90 ° for BARA-RAKEG. Water pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKEG - 90 ° external angle

153
€54.46
External angle 90 ° for BARA-RAKEG. Water pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKE - 135 ° external angle

153
€60.49
External angle 135 ° for BARA-RAKE. Aluminum pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKE - 90 ° internal angle

153
€60.49
Internal angle 90 ° for BARA-RAKE. Profile gutter for balconies with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKE - 90 ° external angle

153
€60.49
External angle 90 ° for BARA-RAKE. Profile gutter for balconies with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RKL - Splice part

153
€6.80
Special accessory to tie or splice profiles BARA-RKL. Pouring for balconies with lacquered aluminum drain.
€23.35
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Accesories for balcony Profiles

BARA-RKLT - external angle 135°

153
€85.37
External angle 135 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Accesories for balcony Profiles

BARA-RKLT - internal angle 90°

153
€85.37
Internal angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Accesories for balcony Profiles

BARA-RKLT - external angle 90°

153
€85.37
External angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
€447.11
Structure expansion joints up to 60 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas.  DELIVERY TIME 7-10 DAYS APPROXIMATELY
€299.58
Structure expansion joints up to 30 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
Product added to wishlist
Product added to compare.

SPECIAL OFFER

August 1-11, 2025
10% discount on all products using coupon: VAC25


IMPORTANT NOTICE

Due to the August holiday period, orders placed between August 1-11, 2025 will be processed starting Tuesday, August 12.
We apologize for the inconvenience.