Home

VINPRO-T - T-shaped profile to transitions of the same height VINPRO-T - T-shaped profile to transitions of the same height 2
Floors profiles

VINPRO-S - U-shaped profile for edge protection

153
€20.81
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
KERDI-LINE-F-50 - Floor-level shower tray drainage kit... KERDI-LINE-F-50 - Floor-level shower tray drainage kit... 2
Drainage of bathrooms, balconies and terraces

KERDI-LINE-F-50 - Floor-level shower tray drainage kit with horizontal central outlet DN50

€311.60
Complete set for floor-level linear showers with horizontal outlet with integrated reverse siphon. Suitable for installation in a central area as well as in a wall area. Complies with DIN EN 1253 with a drainage capacity ≥ 0.8 l/s and an internal water storage height of 50 mm. (Grating and frame not included)
Novotop Access Acero - Botón podotáctil
Accessibility and Safety

Novotop Access Aluminium - Podotactile Buttons

165
€1,716.02
Novotop Access Aluminium tactile buttons are designed as a warning solution to identify areas with obstacles. To create tactile flooring and improve accessibility.
SCHIENE SCHIENE 2
Floors profiles

SCHIENE - Tile corner edge protection profile

153
€9.31
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
BARA-RKB BARA-RKB 2
Balcony Profiles

BARA-RKB - Aluminum balcony gutter profile

153
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
Novojunta Pro Metal 50 - Aluminum structural expansion joint
Structural expansion joints

Novojunta Pro Metal 50 - Aluminum structural expansion joint

165
€376.02
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
SCHIENE-TS -Corner profile for parquets or terrazzo SCHIENE-TS -Corner profile for parquets or terrazzo 2
Floors profiles

SCHIENE-AC - Anodised aluminium edge profile

153
€17.10
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
View
BARA-RKB - ángulo externo 135° BARA-RKB - ángulo externo 135° 2
Accesories for balcony Profiles

BARA-RKB - External angle of 135 °

153
€39.71
External angle 135 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
BARA-RKB - ángulo interno 90° BARA-RKB - ángulo interno 90° 2
Accesories for balcony Profiles

BARA-RKB - 90 ° internal angle

153
€38.09
Internal angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
BARA-RKB - ángulo externo 90° BARA-RKB - ángulo externo 90° 2
Accesories for balcony Profiles

BARA-RKB - 90 ° external angle

153
€38.09
External angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
BARA-RKB - empalme BARA-RKB - empalme 2
Accesories for balcony Profiles

BARA-RKB - Splice piece

153
€3.54
Splice for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
VINPRO-RO - Aluminum round edge profile for elastic coverings VINPRO-RO - Aluminum round edge profile for elastic coverings 2
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€24.54
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
Home
Product added to wishlist
Product added to compare.