Home

Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Edging & outside wall corners profiles

FINEC-E - Stainless steel ultra slim edge profile

153
€30.86
Stainless steel high-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Edging & outside wall corners profiles

FINEC-TS - Ultra slim edge profile

153
€38.31
High-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-E - external angle

153
€3.63
External angle accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Edging & outside wall corners profiles

FINEC-A - Ultra slim edge profile

153
€16.77
High-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
€135.07
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
€109.25
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Accessibility and Safety

Novotop Access Steel - Podotactile button

165
€452.93
Novotop Access Steel tactile buttons are made of zinc plated steel and designed as a warning solution to identify areas with obstacles. To create a tactile floor.
€19.96
Embellisher profile for joints. The top section covers and decorates the joint created by tiles. For its placement, just incrust it into the joint between floorings. It can be placed before or after the flooring. It is available in matt silver and matt gold finishes.
Accessibility and Safety

Novotop Access Aluminium - Podotactile Buttons

165
€1,747.92
Novotop Access Aluminium tactile buttons are designed as a warning solution to identify areas with obstacles. To create tactile flooring and improve accessibility.
Product added to wishlist
Product added to compare.