Home

Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.39
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-MC - Exterior angle

153
€3.57
Special accessory in exterior angle for corner profile for tiles. Brass profile chrome finish for tile wall corners.
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-MC - Internal Angle

153
€3.57
Special internal corner piece for corner tile for RONDEC-MC. Made of chromed brass for the corners of tiled walls.
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-E - external angle

153
€3.63
External angle accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Edging & outside wall corners profiles

JOLLY-P - Decorative PVC edging profile

153
€6.92
PVC decorative edging profile and skirting covering that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Edging & outside wall corners profiles

Novopared Novosuelo - PVC edge corner profile

165
€4.85
PVC corners for wall or floor economical modern line at right angles as a finish to protect and decorate corners of ceramic tiles.  Profile with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floors or walls between 6 and 12 mm in height.
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
€16.46
90º external angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
€16.46
90º internal angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€107.19
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Edging & outside wall corners profiles

JOLLY-AC - Lacquered aluminum edging profile

153
€16.53
Edging profile that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
€16.46
External angle 135º. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
€9.31
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€16.46
135º internal angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
€119.63
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
Edging & outside wall corners profiles

RONDEC-A - Anodized aluminum rounded edge profile

153
€23.68
Anodized aluminum rounded profile for ceramic coated wall corners with a spacer to achieve symmetrical joints. Through the spacer, a joint is defined between the profile and the tile. 
Profile Accessories

SCHIENE-STEP-EB - Splice

€14.49
Splicing Angle Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Waterproofing membranes

KERDI-KERS-R - Right corner

153
€14.78
Complements of prefabricated welded parts of right corner for waterproofing sheet. For making right corner in work showers.
Edging & outside wall corners profiles

ECK-E - Stainless steel profile for protecting the outside corners

153
€52.10
Stainless steel edge profile with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
Waterproofing membranes

KERDI-KERS-L - Left corner

153
€14.78
Accessory of prefabricated welded parts of left corner for KERDI waterproofing sheet special for work showers.
€7.89
Expansion joints or movement joints made of coextruded PVC that allows to absorb movement variations offering good resistance. Model Novojunta 3.
Accesories for balcony Profiles

BARA-RKK - Splicing Space Piece

153
€3.54
Splice for T-shaped gutter profile with dropper, which is placed on a slope with slope.
Edging & outside wall corners profiles

WINKEL - L-shaped solid aluminum profile

153
€13.80
Solid non-perforated angular aluminum profile for different fields of application. It can be used as corners or corners for tiles that receive frequent blows or impacts. As a decorative finish or as a transition profile between orthogonal walls of different materials.
Entrance matting systems

Angle frame profile for built-in doormat

€54.53
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
Structural expansion joints

DILEX-EKSB - Ultra thin expansion joints

153
€85.10
Profile for expansion joints or fine and ultrafine movement for pvc or linoleum flooring. Maintenance free and suitable for heavy mechanical wear.
Walls, Floor and countertops profiles

Novoescocia 4 - Cove-shaped profile overlaid

165
€36.61
Aluminum cove-shaped profile to be installed on finished tiled installations to help cleaning the tiled corners/angles or the skirtings. It is easy to install using adhesives type silicone that maintain the sealing.
Edging & outside wall corners profiles

QUADEC-PQ - Colored PVC square edge profile

153
€7.32
Colored PVC square edge profile model that work as decorative profiles to make corner corners for tiles on walls with ceramic coverings.
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
€17.81
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€17.62
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
€31.81
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Accesories for balcony Profiles

BARA-RKKE - External angle of 135 °

153
€51.02
External angle 135 ° for BARA-RKKE. T-shaped aluminum drip profile with water drop. The perforated profile protects and cleans tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° internal angle

153
€51.02
90 ° internal angle for T-shaped aluminum pouring water profile with BARA-RKKE drip. The perforated profile protects tile edges.
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€42.51
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Accesories for balcony Profiles

BARA-RKKE - 90 ° exterior angle

153
€51.02
External angle of 90 ° for BARA-RKKE. Pouring profile for T-shaped balconies. The profile keeps edges of tiles and coverings.
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€28.93
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
Edging & outside wall corners profiles

ECK-E - 135º stainless steel corners

153
€84.72
Stainless steel edge profile corners 135º open angle for corner protection. Corners for tiles in encounter of non-straight walls with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
Profile Accessories

QUADEC-MC - angle

153
€4.44
Angle accessory for QUADEC-MC. High quality chrome-plated brass trim profile for outer corners of ceramic clad walls.
Profile Accessories

QUADEC-E - angle

153
€4.50
Angle for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-E - plug

153
€2.29
Plug accessory for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-A - Angle

153
€4.44
Angle for QUADEC-A. High quality anodized aluminum trim profile for exterior corners of walls covered with ceramic tiles.
Profile Accessories

QUADEC-AC - angle

153
€4.44
Angle accessory for QUADEC-AC. High quality anodized aluminum finish profile for exterior corners of ceramic walls.
Profile Accessories

QUADEC-PQ - angle

153
€1.82
Angle accessory for QUADEC-PQ. Colored PVC profile for the external corners and corners in walls with ceramic coverings.
Profile Accessories

RONDEC-A - external angle

153
€3.57
Accessory for external angle. RONDEC-A is an anodized aluminum profile for wall corners with ceramic coatings.
Profile Accessories

RONDEC-A - internal angle

153
€3.57
Internal angle accessory for RONDEC-A. Anodized aluminum profile for wall corners with ceramic cladding.
€26.55
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Profile Accessories

RONDEC-AC - External angle

153
€3.57
External angle accessory for RONDEC-AC. Rounded aluminum corner profile lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-AC - Internal Angle

153
€3.57
Internal angle for RONDEC-AC. Rounded aluminum corner bar lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-PRO - external angle

153
€1.89
Accessory for external angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRO - internal angle

153
€1.89
Accessory for internal angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-TS - external angle

153
€11.89
RONDEC-TS external angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-TS - internal angle

153
€11.89
RONDEC-TS internal angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-PRG - External angle

153
€1.89
RONDEC-PRG - external angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRG - Internal Angle

153
€1.89
RONDEC-PRG - internal angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Drainage of bathrooms, balconies and terraces

TROBA-LINE-TL / H - Height regulator accessory

153
€25.09
Height regulator, which facilitates the installation of TROBA-LINE-TL and TROBA-LINE-TLR perforated drainage channels at varying heights up to 40 mm.
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
Product added to wishlist
Product added to compare.

SPECIAL OFFER

August 1-11, 2025
10% discount on all products using coupon: VAC25


IMPORTANT NOTICE

Due to the August holiday period, orders placed between August 1-11, 2025 will be processed starting Tuesday, August 12.
We apologize for the inconvenience.