Home

Profile Accessories

RONDEC-MC - Exterior angle

153
€3.57
Special accessory in exterior angle for corner profile for tiles. Brass profile chrome finish for tile wall corners.
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Edge countertop profiles

SCHIENE-STEP - Aluminum worktop corner

€64.63
Decorative profiles for the protection of the edges and edges of kitchen countertops. Aluminum profiles for shelves, stair steps or countertops.
Profile Accessories

RONDEC-MC - Internal Angle

153
€3.57
Special internal corner piece for corner tile for RONDEC-MC. Made of chromed brass for the corners of tiled walls.
€275.26
DITRA-DRAIN-8 is the ideal universal substrate for tile coverings in outdoor areas. The polyethylene membrane with its striking stud structure has a fleece fabric to bond with the tile adhesive and a special filter webbing. DITRA-DRAIN 8 not only uncouples the covering from the substrate, but also functions as a passive capillary bonded drainage – for...
Profile Accessories

RONDEC-E - external angle

153
€3.63
External angle accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Edging & outside wall corners profiles

JOLLY-P - Decorative PVC edging profile

153
€7.44
PVC decorative edging profile and skirting covering that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Edging & outside wall corners profiles

Novopared Novosuelo - PVC edge corner profile

165
€4.67
PVC corners for wall or floor economical modern line at right angles as a finish to protect and decorate corners of ceramic tiles.  Profile with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floors or walls between 6 and 12 mm in height.
Embedded stair profile

TREP-B - Anti-slip stair nosing trim

153
€67.40
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
Embedded stair profile

TREP-S - Rung profiles with non-slip rubber

153
€48.34
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Profile that prevents water overflow in showers at ground level. Combine with straight or semicircular plastic flange. Wheelchairs pass. The rubber seal prevents overflow. The profile can be combined with a straight or semicircular plastic flange. (Aluminium profile only)
Edging & outside wall corners profiles

Novopilastra - Aluminum corners profile

165
€23.92
Profile of anodized aluminum based on simple, pure and perfect shapes. It is perfect to finish and protect wall corners and work surfaces and to beautify wall tiles in an industrial style environment. Currently, it is one of the most important decorative trends.
Shower profiles

SHOWERPROFILE-WSK / EK - Plug

153
€3.83
Accessory cover profile for work showers at ground level with straight or semicircular plastic flange. Showers accessible in wheelchairs.
Profile Accessories

RONDEC-A - splice

153
€1.21
RONDEC-A splicing accessory. Anodized aluminum profile for wall corners with ceramic cladding.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Balcony Profiles

BARA-RW - Dripper L-shaped profile

153
€124.15
L-shaped finishing profile made of stainless steel or colour coated aluminium for the exposed edges of balconies and terraces. The profile produces a visually appealing edge finish and protects the exposed edges of the structural slab from weather and corrosion. 
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€97.71
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Edging & outside wall corners profiles

JOLLY-AC - Lacquered aluminum edging profile

153
€17.53
Edging profile that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Decorative joints profiles for tiles

QUADEC-FS - Decorative aluminum borders

153
€106.97
Decorative borders or aluminum profiles as listels for kitchens and bathrooms QUADEC-FS model that allows the insertion of ceramic strips inside.
€9.67
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€98.78
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
Edging & outside wall corners profiles

RONDEC-A - Anodized aluminum rounded edge profile

153
€25.01
Anodized aluminum rounded profile for ceramic coated wall corners with a spacer to achieve symmetrical joints. Through the spacer, a joint is defined between the profile and the tile. 
Floors profiles

SCHIENE-ES - Tile corner profile

153
€28.17
Transitions or coverings profile to protect and decorate edges or edges of ceramic tiles and floors. With joint separator between profile and tile.
Edge countertop profiles

RONDEC-STEP - Aluminum worktop corners

153
€82.11
Decorative profiles for the protection of the edges and edges of kitchen countertops. Aluminum profiles with a smooth finish for shelves and kitchens.
Decorative joints profiles for tiles

RONDEC-DB - Decorative aluminum borders

153
€20.98
Decorative borders, aluminum profiles or listels for kitchens and bathrooms RONDEC-DB model. Decorative lists with rounded shape.
Edging & outside wall corners profiles

ECK-E - Stainless steel profile for protecting the outside corners

153
€54.11
Stainless steel edge profile with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
€8.14
Expansion joints or movement joints made of coextruded PVC that allows to absorb movement variations offering good resistance. Model Novojunta 3.
Accesories for balcony Profiles

BARA-RKK - Splicing Space Piece

153
€3.54
Splice for T-shaped gutter profile with dropper, which is placed on a slope with slope.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€50.43
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€30.16
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€47.45
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
Edging & outside wall corners profiles

QUADEC-PQ - Colored PVC square edge profile

153
€7.68
Colored PVC square edge profile model that work as decorative profiles to make corner corners for tiles on walls with ceramic coverings.
€18.84
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€17.94
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
€33.92
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Accesories for balcony Profiles

BARA-RKKE - External angle of 135 °

153
€51.02
External angle 135 ° for BARA-RKKE. T-shaped aluminum drip profile with water drop. The perforated profile protects and cleans tile edges.
Accesories for balcony Profiles

BARA-RKKE - 90 ° internal angle

153
€51.02
90 ° internal angle for T-shaped aluminum pouring water profile with BARA-RKKE drip. The perforated profile protects tile edges.
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€45.22
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Accesories for balcony Profiles

BARA-RKKE - 90 ° exterior angle

153
€51.02
External angle of 90 ° for BARA-RKKE. Pouring profile for T-shaped balconies. The profile keeps edges of tiles and coverings.
Floor and wall bridge joints

DILEX-EF - Floor or wall meeting board

153
€17.58
Expansion joint or flexible hard / soft plastic meeting as a meeting joint for interior corners between walls or floor / wall delivery.
Floor and wall bridge joints

DILEX-AHKA - cove-shaped profile sanitary aluminum

153
€71.28
Coveshaped aluminium profiles for internal wall corners, kitchen worktops, or surfaces with ceramic coverings. Schlüter®-DILEX-AHK/- AHKA profiles are available in a variety of anodised finishes. 
Floor and wall bridge joints

DILEX-EKE - Floor or wall meeting board

153
€17.58
DILEX-EKE expansion or meeting board. Flexible plastic profile for corner joints, corners or for the connection between floor and wall.
Accessibility and Safety

Novonivel - Aluminum transition ramp profile

165
€28.30
Ramp transition profile to avoid the difference of level created when laying floorings at different height, as when a new flooring is layed onto an old one. This is very common in restoration works.
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€35.10
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
Edging & outside wall corners profiles

ECK-E - 135º stainless steel corners

153
€88.14
Stainless steel edge profile corners 135º open angle for corner protection. Corners for tiles in encounter of non-straight walls with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
Accesories for balcony Profiles

BARA-RW - Splice piece

153
€7.24
Splice for gutter profile in the form of a square of stainless steel or lacquered aluminum to finish off the edges on balconies and terraces.
Accesories for balcony Profiles

BARA-RW - 90 ° external angle

153
€49.18
External angle 90 ° for profile gutters in the form of square stainless steel or lacquered aluminum to finish off the edges on balconies and terraces.
Profile Accessories

QUADEC-MC - angle

153
€4.44
Angle accessory for QUADEC-MC. High quality chrome-plated brass trim profile for outer corners of ceramic clad walls.
Profile Accessories

QUADEC-E - angle

153
€4.50
Angle for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-E - plug

153
€2.29
Plug accessory for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Profile Accessories

QUADEC-A - Angle

153
€4.44
Angle for QUADEC-A. High quality anodized aluminum trim profile for exterior corners of walls covered with ceramic tiles.
Profile Accessories

QUADEC-AC - angle

153
€4.44
Angle accessory for QUADEC-AC. High quality anodized aluminum finish profile for exterior corners of ceramic walls.
Profile Accessories

QUADEC-TS - angle

153
€11.89
Angle for QUADEC-TS. High quality aluminum trim profile with relief for exterior corners of walls covered with ceramic tiles.
Profile Accessories

QUADEC-FS - angle

153
€29.97
Angle accessory for QUADEC-FS. Decorative profile, which allows the insertion of borders or ceramic strips.
Edging & outside wall corners profiles

Novolistel 3 Inox - Stainless steel corner edge profile

165
€56.63
Square section profile, made of AISI304 stainless steel, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Profile Accessories

QUADEC-PQ - angle

153
€1.82
Angle accessory for QUADEC-PQ. Colored PVC profile for the external corners and corners in walls with ceramic coverings.
Edging & outside wall corners profiles

Novolistel 3 Alum - Aluminum corner edge profile

165
€23.82
Square section profile, made of Aluminum, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Profile Accessories

RONDEC-E - Special splice piece

153
€2.26
RONDEC-E and SCHIENE-E splicing accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Profile Accessories

RONDEC-A - external angle

153
€3.57
Accessory for external angle. RONDEC-A is an anodized aluminum profile for wall corners with ceramic coatings.
Profile Accessories

RONDEC-A - internal angle

153
€3.57
Internal angle accessory for RONDEC-A. Anodized aluminum profile for wall corners with ceramic cladding.
€32.35
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Profile Accessories

RONDEC-AC - External angle

153
€3.57
External angle accessory for RONDEC-AC. Rounded aluminum corner profile lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-AC - Internal Angle

153
€3.57
Internal angle for RONDEC-AC. Rounded aluminum corner bar lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-PRO - external angle

153
€1.89
Accessory for external angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRO - internal angle

153
€1.89
Accessory for internal angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-TS - external angle

153
€11.89
RONDEC-TS external angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-TS - internal angle

153
€11.89
RONDEC-TS internal angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-PRG - External angle

153
€1.89
RONDEC-PRG - external angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Drainage of bathrooms, balconies and terraces

TROBA-PLUS - Draining film with veil

153
€240.11
Drainage sheet that evacuates water safely. The conical nodules are highly resistant and covered with a permeable veil.
Profile Accessories

RONDEC-PRG - Internal Angle

153
€1.89
RONDEC-PRG - internal angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Drainage of bathrooms, balconies and terraces

TROBA-PLUS-G - Draining sheet with mesh

153
€280.37
Drainage sheet to evacuate water safely. The conical nodules are highly resistant and covered with a permeable mesh.
Profile Accessories

RONDEC-STEP-CT - External angle of 90º

153
€29.78
External angle of 90º for aluminum corner profile RONDEC-STEP-CT for edge protection for kitchen countertops with ceramic coverings.
Profile Accessories

RONDEC-STEP-CT - Internal angle of 90º

153
€29.78
Internal angle of 90º for corner profile or countertop guard RONDEC-STEP-CT for protection of edges or edges of kitchen countertops.
Profile Accessories

RONDEC-STEP-CT - 135º internal angle

153
€29.78
Internal angle of 135º for RONDEC-STEP-CT corner profile. Aluminum profile for edge protection on kitchen countertops with ceramic coatings.
€29.78
Internal angle 90º for RONDEC-STEP. Profile for singing countertops and ceramic tile steps. For the singing of countertops and ceramic steps.
Profile Accessories

RONDEC-STEP - 135º internal angle

153
€29.78
Internal angle 135 for RONDEC-STEP aluminum corner. Edge protection profile of ceramic countertops and steps.
Profile Accessories

INDEC - External angle

153
€4.65
External angle accessory for INDEC. Profile of anodized aluminum corners for exterior corners of walls and finishes of ceramic coatings.
Product added to wishlist
Product added to compare.