Shopping Cart
There are no more items in your cart
Complete set for linear showers at floor level with horizontal outlet with integrated inverted siphon.
It is suitable for installation both in a central area and in a wall area. It complies with the DIN EN 1253 standard with a drainage capacity ≥ 0.8 l/s and a height of water stored inside of 50 mm.
The gutter is supplied with a Schlüter-KERDI waterproof sleeve for watertight sealing of the waterproofing system.
Set components:
- Corner waterproofing (to meet the side wall)
- Gutter with waterproofing sleeve and carrier element
- DN 50 outlet canister with siphon, fixing ring and gasket
- Acoustic isolation
Technical data:
- Outlets: DN 50,
- Drainage capacity: 0.8 l/s
- Water column in siphon: 50 mm
- Build height: 97mm
- Grille width including frame: 74 mm
- Lengths: 50–180 cm at 10 cm intervals
Measures
| Code | L (cm) | L1 (cm) |
| KLF 50 GE 50 | 50 | 55 |
| KLF 50 GE 60 | 60 | 65 |
| KLF 50 GE 70 | 70 | 75 |
| KLF 50 GE 80 | 80 | 85 |
| KLF 50 GE 90 | 90 | 95 |
| KLF 50 GE 100 | 100 | 105 |
| KLF 50 GE 110 | 110 | 115 |
| KLF 50 GE 120 | 120 | 125 |
| KLF 50 GE 130 | 130 | 135 |
| KLF 50 GE 140 | 140 | 145 |
| KLF 50 GE 150 | 150 | 155 |
| KLF 50 GE 160 | 160 | 165 |
| KLF 50 GE 170 | 170 | 175 |
| KLF 50 GE 180 | 180 | 185 |
The Schlüter®-KERDI LINE linear drain for walk-in shower trays is made of high-quality stainless steel. It is available in versions with horizontal or vertical outlet, and in 14 channel lengths that adapt to a framed design grille system (closed steel grille, perforated, or prepared for the placement of a ceramic piece). The design of the Schlüter®-KERDI-LINE linear drains allows them to be installed both where they meet the wall and in the center of the shower tray. In any case, with the Schlüter®-KERDI sleeve already supplied at the factory, reliable waterproofing is guaranteed.
The Schlüter®-KERDI-LINE system
- Channel made of 1.5 mm V4A stainless steel without welding.
- Easy installation thanks to its custom-made carrier element, made of polystyrene.
- Assembly without the need for drilling or screwing.
- Acoustic insulation using perimeter tapes.
- Available version with horizontal or vertical drain.
- Horizontal drainage above the slab.
- Vertical drainage through the slab.
- Removable siphon (Schlüter®-KERDI-LINE-H & -KERDI-LINE-V)
- Single drain format for the wall version and the central version.
- It can also be installed with side walls.
- Schlüter®-KERDI sleeve supplied at the factory.
- Waterproofing with the Schlüter®-KERDI system.