Shopping Cart
There are no more items in your cart
Special finishing profile made of anodised aluminium for resilient coverings (e.g. LVT flooring). It is typically used for edge protection in places where resilient floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings.
Material
VINPRO-S is available in the following materials:
- ACGB = Brushed chrome anodised aluminium
- ATGB = Brushed titanium anodised aluminium (colour may differ from other Schlüter profiles in ATGB finish)
- ABGB = Brushed antique bronze anodised aluminium
Material properties and areas of application:
In applications exposed to chemical or mechanical stresses, the profile’s suitability must be verified. The information provided below is intended as a general guideline.
Anodised aluminium: The aluminium features an anodised finish that may be damaged by aggressive substances or abrasive stresses. Damage to the anodised surface can be restored with paint.
Installation
Attachment with screws:
- Select Schlüter-VINPRO-S according to the thickness of the covering.
- Transfer the positions of the drilling holes to the substrate at the edges of the covering and drill holes with a diameter of 5 mm for the anchors.
- Attach the profile to the floor or wall with counter-sunk screws, Ø 3.5 mm.
- Follow the manufacturer’s specifications for installing the covering.
Attachment with installation adhesive:
- Select Schlüter-VINPRO-S according to the thickness of the covering.
- Adhere the profile with the installation adhesive Schlüter-KERDI-FIX or an equivalent material at the edges of the covering. This installation method is especially suitable for areas where the profile cannot be screwed into the floor.
- Follow the manufacturer’s specifications for installing the covering.
Note: The substrate must be load-bearing and free from debris.
Maintenance
VINPRO-S requires no special maintenance or care. Do not use abrasive cleaning agents on the sensitive surfaces. Damage to the anodised surface can be restored with paint. All cleaning agents must be free of hydrochloric and hydrofluoric acid.