Smart profile with simple design, made of anodized or lacquered aluminum and intended to be installed as a skirting in all kind of walls. Its geometry, which ends with a smooth curve, makes easier the cleaning and avoids the accumulation of germ. It is also useful to cover the typical expansion joints in perimeters.

This profile is very easy to install. It is perfect for new or reform works and in projects where a big quantity of meters is needed. The profile contoured ends give a snug fit on the wall covering over the bottom perimeter along the dilatation gap joint, thus ensuring the necessary expansion movement to the floor.

General Features

• a = 60 / 80 / 100 mm
• h = 15 mm
• Length = 2,50 m

Applications

Skirting baseboard profile made of anodized or lacquered alumimun. This plith baseboard has been designed to protect the bottom of the walls, providing a high decorative and also functional value, as it covers the perimeter joint allowing this way the free movement of the flooring. The aluminium plinth is easy to install by applying adhesive on the rear.

Technical features

• -Material: Anodized/lacquered aluminum
• -Length: 2,5 ml (8.2”)
• -Dimensions: a: 60/80/100 mm (2-3/8” 3/18” 4”)
• -Finishes: Matt silver / White

Materiales

Aluminum

Skirting board profile made by aluminum extrusion. The matt silver finish has been anodized, improving mainly through this process its corrosion resistance, mechanical resistance and appearance. The anodized applied has the quality seal Qualanod, which guarantees the quality of the process and the resulting profiles. This seal regulates several tests: appearance and color, thickness measurements, sealing and impregnation control, abrasion resistance, lightfastness, acetic saline chamber and nitric acid immersion.

The finish has been lacquered, obtaining so a high quality and homogeneus surface. The lacquering has the quality seal Qualicoat, which guarantees the quality of the process and the final products.

The aluminum is a raw material with excellent chemical and physicomechanical properties. It is light, tough, ductile, malleable and highly durable. It has a great resistance to fire and corrosion.

Installation

Rodapié de colocación muy sencilla.

is an easy-to-install profile.

1. Clean the surface to install the plinth.
2. Apply mounting adhesive or polyurethane mastic on the rear
3. Join the profile to the wall and press it to get an optimal adhesion.4. Remove the possible leftover material and let dry.

Cleaning and maintenance

The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must rinse the profile with cold water and dry it to remove the humidity excess. The persistent dirtiness can be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder neutral.

Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended. Citric acid is neither recommended because disolves the protective layer of the surface of aluminium. Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes (hydrofluoroether and chlorinated solvents) and curing accelerators containing chlorides should not be used (use special accelerators free of chlorides).